P116B 2014 Chevrolet Silverado Code - O2 Signal Circuit Low Voltage (NOx Sensor 1)
Quick Answer
The P116B diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates an issue with the O2 signal circuit low voltage for the NOx sensor 1. Common causes include Faulty NOx sensor 1, Damaged wiring or connectors in the O2 signal circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116B 2014 Chevrolet Silverado indicates O2 Signal Circuit Low Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor 1, Damaged wiring or connectors in the O2 signal circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116B 2014 Chevrolet Silverado Description
The P116B diagnostic trouble code (DTC) for a 2014 Chevrolet Silverado indicates an issue with the O2 signal circuit low voltage for the NOx sensor 1. The NOx sensor, or nitrogen oxide sensor, is a crucial component in the vehicle's emissions control system. It is responsible for monitoring the levels of nitrogen oxide in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion and reduced emissions.
Common Causes of P116B 2014 Chevrolet Silverado
- Faulty NOx sensor 1
- Damaged wiring or connectors in the O2 signal circuit
- Malfunctioning ECM
- Exhaust system leaks or damage
- Contaminated exhaust gases affecting sensor readings
Symptoms of P116B 2014 Chevrolet Silverado
- Decreased fuel efficiency
- Engine misfires or hesitation
- Illuminated check engine light
- Rough idling or stalling
- Increased emissions output
How to Fix P116B 2014 Chevrolet Silverado
- Use an OBD-II scanner to retrieve and record the DTCs, including the P116B code.
- Inspect the NOx sensor 1, wiring, and connectors for any visible damage or corrosion.
- Test the NOx sensor 1 using a multimeter to check for proper voltage output.
- Replace the NOx sensor 1 if it is found to be faulty, ensuring proper installation and connection.
- Clear the DTCs from the ECM memory and perform a test drive to verify that the issue has been resolved.
Cost to Fix P116B 2014 Chevrolet Silverado
The typical repair costs for addressing a P116B code on a 2014 Chevrolet Silverado can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. Factors such as location, vehicle make and model, and engine type can also impact the overall repair costs. It's recommended to consult with local auto repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the P116B 2014 Chevrolet Silverado code?
Need more information on how to fix the P116B 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116B 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116B 2014 Chevrolet Silverado Code
What does the OBDII code P116B mean on a 2014 Chevrolet Silverado?
It indicates a low voltage signal in the O2 signal circuit of NOx Sensor 1, which monitors nitrogen oxide levels in the exhaust system.
What are the common symptoms of code P116B?
Symptoms may include a check engine light, reduced fuel efficiency, poor engine performance, and increased emissions.
What causes code P116B on a 2014 Chevrolet Silverado?
Common causes include a faulty NOx sensor, wiring issues such as damage or corrosion, or a problem with the sensor's connector.
Can driving with code P116B damage my Silverado?
Driving with this code may lead to increased emissions and reduced engine efficiency, but it typically won’t cause immediate damage. However, prolonged issues could harm the catalytic converter.
How do you diagnose code P116B?
Start by using a diagnostic scanner to confirm the code, then inspect the NOx sensor, wiring, and connectors for damage, corrosion, or loose connections.
How do you fix code P116B?
Repairs may include replacing the NOx sensor, repairing or replacing damaged wiring, or cleaning and securing the sensor connector.
Can a bad NOx sensor trigger code P116B?
Yes, a malfunctioning NOx sensor is one of the most common causes of this code.
How much does it cost to fix code P116B on a 2014 Chevrolet Silverado?
Costs vary but typically range from $200 to $500 for parts and labor, depending on whether the NOx sensor needs replacement.
Can I clear code P116B without fixing the problem?
You can clear the code temporarily, but it will likely reappear if the underlying issue isn’t resolved.
Is code P116B related to emissions testing?
Yes, this code can cause increased emissions, potentially leading to a failed emissions test if not addressed.
Discuss the causes and fixes for P116B 2014 Chevrolet Silverado OBDII Code
Code P116B 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.