P116B Code - O2 Signal Circuit Low Voltage (NOx Sensor 1)
Quick Answer
The P116B diagnostic trouble code (DTC) indicates a low voltage signal in the O2 sensor circuit for the NOx (nitrogen oxide) sensor 1. Common causes include Faulty O2 sensor, Wiring or connection issues in the O2 sensor circuit, Corrosion or damage to the sensor or wiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116B indicates O2 Signal Circuit Low Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty O2 sensor, Wiring or connection issues in the O2 sensor circuit, Corrosion or damage to the sensor or wiring.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116B Description
The P116B diagnostic trouble code (DTC) indicates a low voltage signal in the O2 sensor circuit for the NOx (nitrogen oxide) sensor 1. The NOx sensor is responsible for monitoring and regulating the levels of nitrogen oxides in the exhaust gases to ensure compliance with emissions regulations. When the O2 signal circuit voltage is low, it can lead to inaccurate readings and affect the vehicle's performance and emissions output. This issue may trigger the check engine light, hinder fuel efficiency, and potentially cause the vehicle to fail emissions tests.
Common Causes of P116B
- Faulty O2 sensor
- Wiring or connection issues in the O2 sensor circuit
- Corrosion or damage to the sensor or wiring
- Exhaust leaks near the sensor
- Issues with the engine control module (ECM) or software
Symptoms of P116B
- Check engine light illuminated
- Decreased fuel efficiency
- Reduced engine performance or power
- Failed emissions test
- Rough idling or stalling
How to Fix P116B
- Begin by diagnosing the specific cause of the low voltage signal, such as testing the O2 sensor, checking wiring connections, and inspecting for any physical damage.
- Replace the NOx sensor 1 if it is determined to be faulty.
- Repair or replace any damaged wiring or connectors in the O2 sensor circuit.
- Clear the DTC and reset the ECM to see if the issue persists.
- Test drive the vehicle to ensure the problem is resolved and the check engine light does not reappear.
Cost to Fix P116B
The cost of repairing a P116B O2 signal circuit low voltage issue can vary depending on the specific cause and the vehicle's make and model. Typically, the price for a new NOx sensor 1 can range from $150 to $300, while labor costs may add an additional $100 to $200. Overall, the total repair cost could be around $250 to $500. It's important to consider that diagnostic time and labor rates at auto repair shops can fluctuate, so it's advisable to obtain quotes from local shops for a more accurate estimate.
Need more information about the P116B code?
Need more information on how to fix the P116B code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116B code diagnosed by a professional: Find a repair shop in your area
Code P116B Information for Specific Makes
- P116B Buick — O2 Signal Circuit Low Voltage (NOx Sensor 1)
- P116B Cadillac — O2 Signal Circuit Low Voltage (NOx Sensor 1)
- P116B Chevrolet — O2 Signal Circuit Low Voltage (NOx Sensor 1)
- P116B GMC — O2 Signal Circuit Low Voltage (NOx Sensor 1)
Frequently Asked Questions about P116B Code
1. What are the common symptoms of OBDII code P116B?
- Common symptoms include poor fuel efficiency, rough idling, reduced engine performance, and the illumination of the check engine light.
2. What does O2 Signal Circuit Low Voltage (NOx Sensor 1) mean in relation to code P116B?
- This code indicates that the O2 sensor circuit for the NOx Sensor 1 is detecting a lower voltage than expected, potentially signaling an issue with the sensor or its wiring.
3. What are some possible causes of OBDII code P116B?
- Causes can include a faulty NOx sensor, damaged wiring or connectors, a malfunctioning powertrain control module (PCM), or issues with the exhaust system.
4. How serious is OBDII code P116B?
- While the seriousness can vary, it's important to address this code promptly to prevent potential damage to the catalytic converter or other engine components.
5. Can I drive my vehicle with OBDII code P116B?
- It is generally not recommended to drive with this code present, as it can lead to poor engine performance and potential long-term damage if left unresolved.
6. How can I diagnose OBDII code P116B?
- Diagnosis typically involves using a scan tool to read the code, inspecting the NOx sensor and its connections, and conducting voltage tests to pinpoint the issue.
7. What are some repair tips for fixing OBDII code P116B?
- Repair tips may include replacing the NOx sensor, repairing damaged wiring, cleaning or replacing connectors, or updating the PCM software if necessary.
8. Can a DIY enthusiast fix OBDII code P116B?
- Depending on their skill level and access to tools, a DIY enthusiast may be able to address this code themselves, especially if it involves simple tasks like sensor replacement or wiring repair.
9. How much does it typically cost to repair OBDII code P116B at a mechanic?
- Repair costs can vary widely depending on the exact cause of the code, but they may range from $200 to $600 or more, including parts and labor.
10. How can I prevent OBDII code P116B from recurring?
- Regular maintenance, such as keeping up with sensor inspections and replacing worn components promptly, can help prevent the reoccurrence of this code.
Discuss the causes and fixes for P116B OBDII Code
Code P116B comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.