P116A 2015 Chevrolet Silverado Code - O2 Signal Circuit (NOx Sensor 1)
Quick Answer
The P116A diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado relates to the O2 signal circuit for NOx Sensor 1. Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116A 2015 Chevrolet Silverado indicates O2 Signal Circuit (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx sensor, Damaged wiring or connectors in the O2 signal circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116A 2015 Chevrolet Silverado Description
The P116A diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado relates to the O2 signal circuit for NOx Sensor 1. This code indicates an issue with the oxygen sensor signal circuit that is responsible for monitoring the levels of nitrogen oxide (NOx) in the exhaust system. The NOx sensor plays a crucial role in ensuring that the vehicle meets emissions standards and operates efficiently.
Common Causes of P116A 2015 Chevrolet Silverado
- Faulty NOx sensor
- Damaged wiring or connectors in the O2 signal circuit
- ECM malfunction
- Exhaust system leaks
- Contaminated fuel
Symptoms of P116A 2015 Chevrolet Silverado
- Rough engine idle
- Decreased fuel efficiency
- Check engine light illuminated
- Failed emissions test
- Engine misfires
How to Fix P116A 2015 Chevrolet Silverado
- Diagnose the issue by using a scan tool to read the DTC and inspect the NOx sensor and related components.
- Replace the faulty NOx sensor if it is determined to be the cause of the issue.
- Repair or replace damaged wiring or connectors in the O2 signal circuit.
- Clear the DTC and reset the ECM to see if the issue is resolved.
- Test drive the vehicle to ensure that the problem has been successfully addressed.
Cost to Fix P116A 2015 Chevrolet Silverado
The typical repair costs for addressing a P116A code on a 2015 Chevrolet Silverado can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, but rates may be higher in metropolitan areas or at dealerships, while independent shops may charge less. It's recommended to check local rates for a more accurate estimate.
Need more information about the P116A 2015 Chevrolet Silverado code?
Need more information on how to fix the P116A 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116A 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116A 2015 Chevrolet Silverado Code
1. What does OBDII code P116A mean on a 2015 Chevrolet Silverado?
P116A indicates an issue with the O2 signal circuit of NOx Sensor 1, which is responsible for monitoring nitrogen oxide emissions in the exhaust system.
2. What are the common symptoms of code P116A in a 2015 Chevrolet Silverado?
Symptoms may include a Check Engine Light, reduced fuel efficiency, increased emissions, or decreased engine performance.
3. What causes the P116A code to appear?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 signal circuit, or issues with the engine control module (ECM).
4. Can driving with the P116A code damage my Silverado?
While driving with this code may not immediately harm the vehicle, unaddressed issues can lead to increased emissions, poor performance, and potential damage to the catalytic converter.
5. How do you diagnose the P116A code?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the NOx sensor and wiring for damage, and testing the sensor’s voltage and signal output.
6. How is the P116A code fixed on a 2015 Chevrolet Silverado?
Repairs typically involve replacing the faulty NOx sensor, repairing damaged wiring, or, in rare cases, reprogramming or replacing the ECM.
7. Is the P116A code covered under warranty for a 2015 Chevrolet Silverado?
It may be covered under the emissions warranty, depending on the vehicle’s mileage and warranty terms. Check with your dealer for details.
8. How much does it cost to repair the P116A code?
The cost can range from $300 to $800, depending on whether the NOx sensor needs replacement and labor costs at your repair shop.
9. Can a dirty or clogged exhaust system trigger the P116A code?
While a dirty exhaust system itself may not trigger the code, it can cause excessive strain on the NOx sensor, leading to failure.
10. Can I clear the P116A code without fixing it?
Clearing the code without addressing the underlying issue will only provide a temporary reset, and the code is likely to return.
Discuss the causes and fixes for P116A 2015 Chevrolet Silverado OBDII Code
Code P116A 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.