P116A 2014 GMC Sierra Code - O2 Signal Circuit (NOx Sensor 1)
Quick Answer
The P116A diagnostic trouble code (DTC) for a 2014 GMC Sierra specifically relates to the O2 signal circuit for NOx Sensor 1. Common causes include Faulty wiring or connectors in the O2 sensor circuit, Damaged NOx sensor, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P116A 2014 GMC Sierra indicates O2 Signal Circuit (NOx Sensor 1).
- Common causes
- Common causes include Faulty wiring or connectors in the O2 sensor circuit, Damaged NOx sensor, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P116A 2014 GMC Sierra Description
The P116A diagnostic trouble code (DTC) for a 2014 GMC Sierra specifically relates to the O2 signal circuit for NOx Sensor 1. This code indicates a problem with the oxygen sensor signal circuit associated with the first nitrogen oxide (NOx) sensor in the vehicle's exhaust system. The NOx sensor plays a crucial role in monitoring and controlling the levels of nitrogen oxides in the exhaust gases to ensure compliance with emissions regulations and optimize engine performance.
Common Causes of P116A 2014 GMC Sierra
- Faulty wiring or connectors in the O2 sensor circuit
- Damaged NOx sensor
- ECM malfunction
- Exhaust system leaks
- Contaminated exhaust gases affecting sensor readings
Symptoms of P116A 2014 GMC Sierra
- Decreased fuel efficiency
- Reduced engine power
- Rough idling or stalling
- Failed emissions test
How to Fix P116A 2014 GMC Sierra
- Begin by conducting a thorough inspection of the O2 sensor wiring and connectors to check for any damage or corrosion. Repair or replace any faulty wiring or connectors.
- Test the NOx sensor for proper functioning and replace it if necessary.
- Check the ECM for any error codes related to the O2 sensor circuit and address any underlying issues.
- Inspect the exhaust system for leaks or other damage that could affect sensor readings.
- Clear the DTC and perform a test drive to ensure that the issue has been resolved.
Cost to Fix P116A 2014 GMC Sierra
The typical repair costs for addressing a P116A code on a 2014 GMC Sierra can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor in your area. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to obtain quotes from multiple shops to get a more accurate estimate. Keep in mind that rates may be higher at dealerships or in metropolitan areas, while independent shops may offer more competitive prices.
Need more information about the P116A 2014 GMC Sierra code?
Need more information on how to fix the P116A 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P116A 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P116A 2014 GMC Sierra Code
1. What does the OBDII code P116A mean on a 2014 GMC Sierra?
P116A indicates an issue with the O2 signal circuit of NOx Sensor 1, which monitors nitrogen oxide levels in the exhaust system.
2. What are common symptoms of the P116A code on a 2014 GMC Sierra?
Symptoms may include reduced fuel efficiency, the check engine light turning on, poor engine performance, or emissions test failure.
3. What causes the P116A code on a 2014 GMC Sierra?
Common causes include a faulty NOx sensor, damaged sensor wiring, poor electrical connections, or issues with the engine control module (ECM).
4. Can I drive with the P116A code on my 2014 GMC Sierra?
Driving with this code is not recommended as it can lead to poor fuel economy, increased emissions, and potential damage to the exhaust system.
5. How do you diagnose the P116A code on a 2014 GMC Sierra?
Diagnosis involves scanning the ECM for additional codes, inspecting the NOx sensor wiring and connectors, and testing the sensor’s functionality.
6. How do you fix the P116A code on a 2014 GMC Sierra?
Repairs may include replacing the NOx Sensor 1, repairing damaged wiring, cleaning electrical connections, or reprogramming the ECM if necessary.
7. How much does it cost to repair the P116A code on a 2014 GMC Sierra?
Replacing the NOx sensor can cost $300–$800, depending on parts and labor rates, while wiring repairs or ECM reprogramming may vary.
8. What tools are needed to fix the P116A code on a 2014 GMC Sierra?
You may need an OBDII scanner, a multimeter for testing wiring, and basic tools to replace the NOx sensor or repair electrical connections.
9. Can a faulty NOx sensor damage my 2014 GMC Sierra?
While a faulty NOx sensor won’t directly damage the vehicle, it can lead to increased emissions and strain on the catalytic converter over time.
10. How can I prevent the P116A code from recurring on my 2014 GMC Sierra?
Regular maintenance, inspecting exhaust sensors and wiring for damage, and using high-quality fuel can help prevent this issue.
Discuss the causes and fixes for P116A 2014 GMC Sierra OBDII Code
Code P116A 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.