Engine-Codes
 
OBDII Code List
 
P1169 2000 HONDA CIVIC

P1169 2000 HONDA CIVIC - Air/Fuel Ratio Sensor 1 LABEL High Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P1169 2000 HONDA CIVIC Possible Causes

  • Faulty Air/Fuel Ratio Sensor 1
  • Air/Fuel Ratio Sensor 1 harness is open or shorted
  • Air/Fuel Ratio Sensor 1 circuit poor electrical connection

How do I fix code P1169 2000 HONDA CIVIC

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1169 2000 HONDA CIVIC code

    Labor: 1.0

    The cost of diagnosing the P1169 2000 HONDA CIVIC code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

P1169 2000 HONDA CIVIC Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1169 2000 HONDA CIVIC Meaning

The Air/Fuel Ratio (A/F) sensor 1 is installed in the exhaust system and detects oxygen content in the exhaust gas. The A/F sensor transmits output voltage to the Engine Control Module (ECM). A heater for the sensor element is embedded in the A/F sensor (sensor 1). It is activated and heats the sensor to stabilize and speed the detection of oxygen content by controlling current flowing through the heater. An increase in the current levels off as the applied voltage to the element electrode reaches a certain range because the amount of oxygen which is led through the diffusion layer is limited. The current amperage is proportional to oxygen content in the exhaust gas, so the air/fuel ratio is detected by the measurement of the current amperage. The ECM compares a set target air/fuel ratio with the detected air/fuel ratio and controls the fuel injection timing.
If the A/F sensor (sensor 1) voltage is low, the air/fuel ratio is lean, and the ECM uses A/F feedback control to issue a Rich command. If the A/F sensor (sensor 1) voltage is high, the air/fuel ratio is rich, and the ECM uses A/F feedback control to issue a Lean command.
OBDII Code P1169 2000 HONDA CIVIC - Air/Fuel Ratio Sensor 1 LABEL High Voltage - Engine-Codes.com

P1169 2000 HONDA CIVIC More Information

Need more information on how to fix the P1169 2000 HONDA CIVIC code?
Get Access to Factory Service Manuals

Related Information