P1162 Code - Air/Fuel Ratio Sensor 1 Circuit Malfunction
Quick Answer
The P1162 code indicates a malfunction in the circuit of the Air/Fuel Ratio Sensor 1, also known as the upstream oxygen sensor. Common causes include Faulty Air/Fuel Ratio Sensor 1, Wiring or connector issues in the sensor circuit, Exhaust leaks near the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1162 indicates Air/Fuel Ratio Sensor 1 Circuit Malfunction.
- Common causes
- Common causes include Faulty Air/Fuel Ratio Sensor 1, Wiring or connector issues in the sensor circuit, Exhaust leaks near the sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1162 Description
The P1162 code indicates a malfunction in the circuit of the Air/Fuel Ratio Sensor 1, also known as the upstream oxygen sensor. This sensor plays a crucial role in monitoring the air-fuel mixture in the exhaust gases and providing feedback to the engine control module (ECM) to adjust the fuel injection for optimal combustion. When this sensor fails or malfunctions, it can lead to inaccurate readings and cause various issues with the vehicle's performance.
Common Causes of P1162
- Faulty Air/Fuel Ratio Sensor 1
- Wiring or connector issues in the sensor circuit
- Exhaust leaks near the sensor
- Contaminated sensor due to oil or coolant leaks
- ECM software or hardware issues
Symptoms of P1162
- Decreased fuel efficiency
- Rough idling or stalling
- Engine misfires
- Poor acceleration
- Illumination of the Check Engine Light
How to Fix P1162
- Diagnose the cause of the malfunction using a scan tool to read the code and live data.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Test the Air/Fuel Ratio Sensor 1 for proper operation and replace if faulty.
- Clear the code and reset the ECM to see if the issue is resolved.
- Perform a road test to verify that the problem has been fixed and the Check Engine Light does not reappear.
Cost to Fix P1162
The cost of repairing a P1162 code can vary depending on the specific cause of the issue. In general, the price range for parts can be between $100 to $300 for a new Air/Fuel Ratio Sensor 1, while labor costs can range from $100 to $200. Overall, the total repair cost could be anywhere from $200 to $500. It's important to note that labor rates and part prices can fluctuate based on location and the type of vehicle being serviced.
When is the Code Detected?
Need more information about the P1162 code?
Need more information on how to fix the P1162 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1162 code diagnosed by a professional: Find a repair shop in your area
Code P1162 Information for Specific Makes
- P1162 Acura — Air/Fuel Ratio Sensor 1 Circuit Malfunction
- P1162 Audi — Intake Air Temperature Sensor Short To Ground
- P1162 BMW — Fuel Trim Additve Per Ignition Bank 1 Low
- P1162 Honda — Air/Fuel Ratio Sensor 1 Circuit Malfunction
- P1162 Hyundai — High Pressure Pump & Fuel Line
- P1162 Land Rover — LH Bank Lambda Control Adaption Per Ignition Too Large
- P1162 MINI — Fuel Trim Additve Per Ignition Bank 1 Low
- P1162 Volkswagen — Intake Air Temperature Sensor Short To Ground
Frequently Asked Questions about P1162 Code
No Frequently Asked Questions about P1162 Code found.
Discuss the causes and fixes for P1162 OBDII Code
Code P1162 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.