P1160 2014 Chevrolet Silverado Code - O2 Reference Voltage Circuit High Voltage (NOx Sensor 1)
Quick Answer
The O2 Reference Voltage Circuit High Voltage (NOx Sensor 1) diagnostic trouble code (DTC) P1160 in a 2014 Chevrolet Silverado indicates that there is a high voltage condition detected in the oxygen sensor reference circuit for the NOx (nitrogen oxide) sensor 1. Common causes include Faulty NOx Sensor: A malfunctioning NOx sensor can cause high voltage in the O2 reference voltage circuit, Wiring Issues: Damaged or corroded wiring connections in the O2 reference voltage circuit can lead to a high voltage condition, ECM Malfunction: A problem with the engine control module (ECM) can disrupt the voltage signal to the NOx sensor, triggering the P1160 code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1160 2014 Chevrolet Silverado indicates O2 Reference Voltage Circuit High Voltage (NOx Sensor 1).
- Common causes
- Common causes include Faulty NOx Sensor: A malfunctioning NOx sensor can cause high voltage in the O2 reference voltage circuit, Wiring Issues: Damaged or corroded wiring connections in the O2 reference voltage circuit can lead to a high voltage condition, ECM Malfunction: A problem with the engine control module (ECM) can disrupt the voltage signal to the NOx sensor, triggering the P1160 code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1160 2014 Chevrolet Silverado Description
The O2 Reference Voltage Circuit High Voltage (NOx Sensor 1) diagnostic trouble code (DTC) P1160 in a 2014 Chevrolet Silverado indicates that there is a high voltage condition detected in the oxygen sensor reference circuit for the NOx (nitrogen oxide) sensor 1. The NOx sensor is responsible for monitoring and controlling the level of nitrogen oxides in the exhaust gases of the vehicle. The reference voltage circuit provides a stable voltage signal to the sensor to ensure accurate readings.
Common Causes of P1160 2014 Chevrolet Silverado
- Faulty NOx Sensor: A malfunctioning NOx sensor can cause high voltage in the O2 reference voltage circuit.
- Wiring Issues: Damaged or corroded wiring connections in the O2 reference voltage circuit can lead to a high voltage condition.
- ECM Malfunction: A problem with the engine control module (ECM) can disrupt the voltage signal to the NOx sensor, triggering the P1160 code.
- Short Circuit: A short circuit in the O2 reference voltage circuit can cause voltage spikes and result in the high voltage condition.
- Sensor Calibration: Improper calibration of the NOx sensor can also lead to high voltage readings in the reference circuit.
Symptoms of P1160 2014 Chevrolet Silverado
- Check Engine Light: The most common symptom associated with DTC P1160 is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Fuel Efficiency: A high voltage condition in the O2 reference voltage circuit can lead to incorrect fuel mixture adjustments, resulting in decreased fuel efficiency.
- Engine Misfires: The engine may experience misfires or rough idling due to inaccurate sensor readings caused by the high voltage condition.
- Increased Emissions: The vehicle may produce higher levels of emissions than usual, potentially causing it to fail emissions tests.
- Loss of Power: In severe cases, the vehicle may experience a loss of power or acceleration due to improper fuel mixture adjustments.
How to Fix P1160 2014 Chevrolet Silverado
- Diagnose the Issue: Use a diagnostic scanner to retrieve the DTC P1160 and perform a thorough inspection of the NOx sensor, wiring, and ECM to identify the root cause of the high voltage condition.
- Replace NOx Sensor: If the NOx sensor is found to be faulty, replace it with a new, OEM-quality sensor to ensure accurate readings and proper emissions control.
- Repair Wiring: Inspect the wiring connections in the O2 reference voltage circuit and repair any damaged or corroded wires to restore proper voltage signal transmission.
- Check ECM Functionality: Test the engine control module (ECM) for any malfunctions or software issues that may be causing the high voltage condition and address them accordingly.
- Clear DTC and Test Drive: After completing the repairs, clear the DTC P1160 from the ECM memory and take the vehicle for a test drive to ensure that the issue has been resolved.
Cost to Fix P1160 2014 Chevrolet Silverado
The typical repair costs for addressing DTC P1160 in a 2014 Chevrolet Silverado can vary depending on the specific cause of the high voltage condition. In general, replacing a faulty NOx sensor can cost between $200 and $400, including parts and labor. Repairing wiring issues may range from $100 to $300, while diagnosing and testing the ECM functionality can add an additional $100 to $200 to the total repair bill. Overall, the total cost for resolving this issue may fall between $400 and $900, excluding any potential diagnostic fees or taxes.
Need more information about the P1160 2014 Chevrolet Silverado code?
Need more information on how to fix the P1160 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1160 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1160 2014 Chevrolet Silverado Code
1. What does the OBDII code P1160 mean on a 2014 Chevrolet Silverado?
P1160 indicates a problem with the O2 reference voltage circuit for NOx Sensor 1, showing unusually high voltage.
2. What are the common symptoms of code P1160 in a 2014 Chevrolet Silverado?
Symptoms may include the check engine light, reduced fuel efficiency, poor engine performance, or difficulty passing emissions tests.
3. What causes the P1160 code on a 2014 Chevrolet Silverado?
Common causes include a faulty NOx sensor, damaged wiring or connectors in the O2 reference circuit, or a malfunctioning engine control module (ECM).
4. How is the P1160 code diagnosed on a 2014 Chevrolet Silverado?
Diagnosis typically involves scanning the ECM for codes, inspecting the wiring and connectors, testing the NOx sensor, and verifying the reference voltage circuit.
5. Can I drive my 2014 Chevrolet Silverado with a P1160 code?
Driving with this code is not recommended as it may lead to poor engine performance, increased emissions, and potential damage to other components.
6. How do I fix the P1160 code on a 2014 Chevrolet Silverado?
Repairs may include replacing the NOx sensor, repairing or replacing damaged wiring or connectors, or reprogramming/updating the ECM.
7. How much does it cost to fix the P1160 code on a 2014 Chevrolet Silverado?
Repair costs vary but typically range from $200 to $600, depending on whether the NOx sensor or wiring needs replacement.
8. Can a bad NOx sensor cause the P1160 code in a 2014 Chevrolet Silverado?
Yes, a faulty NOx sensor is one of the most common causes of this code.
9. What tools are needed to diagnose the P1160 code on a 2014 Chevrolet Silverado?
You’ll need an OBDII scanner, a multimeter for voltage testing, and possibly wiring diagrams for the vehicle.
10. Can a software update fix the P1160 code on a 2014 Chevrolet Silverado?
In some cases, an ECM software update may resolve the issue if it’s related to a programming error.
Discuss the causes and fixes for P1160 2014 Chevrolet Silverado OBDII Code
Code P1160 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.