P1153 Hyundai Code - Accelerator Position Circuit High Input
Quick Answer
The P1153 diagnostic trouble code (DTC) in Hyundai vehicles indicates a problem with the accelerator position circuit's high input. Common causes include Faulty accelerator position sensor: The APS may be worn out or damaged, causing it to send incorrect voltage signals to the ECM, Wiring issues: Problems with the wiring connecting the APS to the ECM, such as a short circuit or open circuit, can disrupt the signal transmission, Faulty ECM: A malfunctioning ECM can misinterpret the APS signal, leading to a high input code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1153 Hyundai indicates Accelerator Position Circuit High Input.
- Common causes
- Common causes include Faulty accelerator position sensor: The APS may be worn out or damaged, causing it to send incorrect voltage signals to the ECM, Wiring issues: Problems with the wiring connecting the APS to the ECM, such as a short circuit or open circuit, can disrupt the signal transmission, Faulty ECM: A malfunctioning ECM can misinterpret the APS signal, leading to a high input code.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1153 Hyundai Description
The P1153 diagnostic trouble code (DTC) in Hyundai vehicles indicates a problem with the accelerator position circuit's high input. The accelerator position sensor (APS) is responsible for sending signals to the engine control module (ECM) to determine how much fuel and air should be delivered to the engine based on how far the accelerator pedal is pressed. When the ECM detects a high input from the APS, it means that the signal voltage is outside the normal range, which can lead to issues with engine performance and fuel efficiency.
Common Causes of P1153 Hyundai
- Faulty accelerator position sensor: The APS may be worn out or damaged, causing it to send incorrect voltage signals to the ECM.
- Wiring issues: Problems with the wiring connecting the APS to the ECM, such as a short circuit or open circuit, can disrupt the signal transmission.
- Faulty ECM: A malfunctioning ECM can misinterpret the APS signal, leading to a high input code.
- Corrosion: Corrosion or moisture in the APS connector or wiring can also cause issues with the accelerator position circuit.
- Poor electrical connections: Loose or poor electrical connections between components can result in signal disruptions.
Symptoms of P1153 Hyundai
- Erratic acceleration: The vehicle may exhibit sudden changes in acceleration or lack of response when pressing the accelerator pedal.
- Poor fuel economy: A high input from the APS can cause the engine to receive incorrect fueling instructions, leading to decreased fuel efficiency.
- Stalling: The engine may stall unexpectedly, especially when coming to a stop or idling.
- Check Engine Light: The Check Engine Light may illuminate on the dashboard, indicating a problem with the accelerator position circuit.
How to Fix P1153 Hyundai
- Diagnose the issue: Use a diagnostic tool to read the P1153 code and perform a thorough inspection of the accelerator position sensor, wiring, and ECM.
- Replace the accelerator position sensor: If the APS is found to be faulty, replace it with a new sensor to ensure accurate signal transmission.
- Repair or replace wiring: Address any wiring issues, such as shorts or open circuits, by repairing or replacing the affected wiring.
- Check and reset ECM: Verify the ECM's functionality and reset it to clear the high input code and recalibrate the APS signal.
- Test drive and recheck: After repairs are completed, test drive the vehicle to ensure that the symptoms associated with the P1153 code have been resolved. Recheck for any remaining issues or warning lights.
Cost to Fix P1153 Hyundai
The typical repair costs for addressing a P1153 code in a Hyundai vehicle can range from $200 to $500, including parts and labor. The cost will depend on the specific cause of the issue, the price of the replacement parts, and the labor rates charged by the auto repair shop. It's important to note that diagnosis time and labor rates can vary, so it's advisable to check with local auto repair shops for a more accurate estimate based on your location and vehicle model.
Need more information about the P1153 Hyundai code?
Need more information on how to fix the P1153 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1153 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1153 Hyundai Code
No Frequently Asked Questions about P1153 Hyundai Code found.
Discuss the causes and fixes for P1153 Hyundai OBDII Code
Code P1153 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.