P1153 2018 GMC Sierra Code - HO2S Insufficient Switching Bank 2 Sensor 1
Quick Answer
The P1153 diagnostic trouble code (DTC) for a 2018 GMC Sierra refers to an issue with the HO2S (Heated Oxygen Sensor) insufficient switching on Bank 2 Sensor 1. Common causes include Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning HO2S on Bank 2 Sensor 1, Wiring or Connector Issues: Damaged wiring or a poor connection to the oxygen sensor can disrupt its functionality, Exhaust Leaks: Leaks in the exhaust system can affect the accuracy of the oxygen sensor readings. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1153 2018 GMC Sierra indicates HO2S Insufficient Switching Bank 2 Sensor 1.
- Common causes
- Common causes include Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning HO2S on Bank 2 Sensor 1, Wiring or Connector Issues: Damaged wiring or a poor connection to the oxygen sensor can disrupt its functionality, Exhaust Leaks: Leaks in the exhaust system can affect the accuracy of the oxygen sensor readings.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1153 2018 GMC Sierra Description
The P1153 diagnostic trouble code (DTC) for a 2018 GMC Sierra refers to an issue with the HO2S (Heated Oxygen Sensor) insufficient switching on Bank 2 Sensor 1. The oxygen sensor is a crucial component of the vehicle's emissions control system, responsible for monitoring the oxygen levels in the exhaust gases to ensure optimal fuel efficiency and emissions. In this case, the code indicates that the oxygen sensor on Bank 2 (typically the side of the engine opposite the #1 cylinder) Sensor 1 (upstream sensor before the catalytic converter) is not switching between rich and lean air/fuel mixture readings as it should.
Common Causes of P1153 2018 GMC Sierra
- Faulty Oxygen Sensor: The most common cause of this code is a malfunctioning HO2S on Bank 2 Sensor 1.
- Wiring or Connector Issues: Damaged wiring or a poor connection to the oxygen sensor can disrupt its functionality.
- Exhaust Leaks: Leaks in the exhaust system can affect the accuracy of the oxygen sensor readings.
- Vacuum Leaks: Vacuum leaks in the engine can also impact the HO2S operation by altering the air/fuel mixture.
- Engine Misfire: An engine misfire can cause the oxygen sensor to not switch properly, leading to this code.
Symptoms of P1153 2018 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A malfunctioning oxygen sensor can lead to incorrect fuel delivery, resulting in reduced fuel efficiency.
- Rough Idle: If the HO2S is not switching properly, the engine may experience rough idling or hesitation during acceleration.
- Increased Emissions: A faulty oxygen sensor can lead to increased emissions, potentially causing the vehicle to fail emissions tests.
How to Fix P1153 2018 GMC Sierra
- Diagnose the Issue: Use a scan tool to retrieve the trouble code and perform further testing to pinpoint the exact cause of the insufficient switching.
- Inspect Oxygen Sensor: Check the condition of the Bank 2 Sensor 1 oxygen sensor and replace it if necessary.
- Check Wiring and Connectors: Inspect the wiring harness and connectors for any damage or corrosion, repairing or replacing as needed.
- Address Exhaust Leaks: Check the exhaust system for leaks and repair any issues to ensure proper oxygen sensor operation.
- Address Engine Misfire: If an engine misfire is detected, diagnose and repair the underlying cause to prevent further issues with the oxygen sensor.
Cost to Fix P1153 2018 GMC Sierra
The cost of repairing a HO2S Insufficient Switching Bank 2 Sensor 1 code can vary depending on the specific cause of the issue and the labor rates in your area. Typically, the cost of replacing an oxygen sensor ranges from $100 to $300, including parts and labor. Additional costs may apply if wiring repairs or other components need attention. It's advisable to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your vehicle's make and model. Keep in mind that labor rates can vary, with hourly rates typically ranging from $80 to $150.
Tech Notes for P1153 2018 GMC Sierra
Need more information about the P1153 2018 GMC Sierra code?
Need more information on how to fix the P1153 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1153 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1153 2018 GMC Sierra Code
No Frequently Asked Questions about P1153 2018 GMC Sierra Code found.
Discuss the causes and fixes for P1153 2018 GMC Sierra OBDII Code
Code P1153 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.