P1152 Hyundai Code - Accelerator Position Circuit Low Input
Quick Answer
The P1152 Hyundai code indicates a low input signal from the accelerator position circuit. Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the accelerator position circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1152 Hyundai indicates Accelerator Position Circuit Low Input.
- Common causes
- Common causes include Faulty accelerator pedal position sensor, Damaged wiring or connectors in the accelerator position circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1152 Hyundai Description
The P1152 Hyundai code indicates a low input signal from the accelerator position circuit. This means that the engine control module (ECM) is receiving a signal that is lower than the expected range from the accelerator pedal position sensor. The accelerator pedal position sensor is a vital component that communicates the position of the accelerator pedal to the ECM, which then adjusts the fuel delivery and ignition timing accordingly. When the ECM detects a low input signal from the accelerator position circuit, it can lead to poor engine performance, reduced fuel efficiency, and potentially unsafe driving conditions.
Common Causes of P1152 Hyundai
- Faulty accelerator pedal position sensor
- Damaged wiring or connectors in the accelerator position circuit
- Malfunctioning ECM
- Corrosion or moisture in the electrical connections
- Mechanical damage to the accelerator pedal assembly
Symptoms of P1152 Hyundai
- Engine hesitation or stumbling during acceleration
- Reduced engine power
- Check Engine Light illuminated on the dashboard
- Poor fuel efficiency
- Difficulty maintaining speed
How to Fix P1152 Hyundai
- Begin by conducting a thorough inspection of the accelerator pedal position sensor, wiring, and connectors to check for any visible damage or corrosion.
- Test the accelerator pedal position sensor using a multimeter to ensure it is functioning within the manufacturer's specified range.
- If the sensor is faulty, replace it with a new, OEM (Original Equipment Manufacturer) part.
- Check and repair any damaged wiring or connectors in the accelerator position circuit.
- Clear the diagnostic trouble codes from the ECM and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1152 Hyundai
The cost of repairing a P1152 Hyundai code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. In general, replacing the accelerator pedal position sensor can cost between $100 and $200, while repairing damaged wiring or connectors may range from $50 to $150. The total repair cost, including parts and labor, can typically range from $200 to $500. It is recommended to consult with a certified mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of the vehicle.
Need more information about the P1152 Hyundai code?
Need more information on how to fix the P1152 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1152 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1152 Hyundai Code
1. What does the OBDII code P1152 mean for a Hyundai?
P1152 indicates a problem with the accelerator position sensor circuit, specifically a low input signal detected by the engine control module (ECM).
2. What are the common symptoms of P1152 on a Hyundai?
Symptoms may include poor acceleration, reduced engine performance, hesitation, or the vehicle going into limp mode.
3. What causes the P1152 code to appear on a Hyundai?
Common causes include a faulty accelerator position sensor, damaged wiring or connectors, or issues with the ECM.
4. Can a dirty throttle body cause the P1152 code on a Hyundai?
While a dirty throttle body typically causes other codes, it may indirectly affect sensor readings and contribute to the issue.
5. How is the P1152 code diagnosed on a Hyundai?
Diagnosis involves using a scan tool to monitor sensor data, inspecting wiring and connectors, and testing the accelerator position sensor for proper operation.
6. Can I drive my Hyundai with the P1152 code?
Driving with this code is not recommended as it can affect engine performance and safety, potentially leading to a loss of throttle control.
7. How do I fix the P1152 code on a Hyundai?
Repairs may include replacing the accelerator position sensor, repairing or replacing damaged wiring, or updating/replacing the ECM.
8. What tools are needed to fix the P1152 code on a Hyundai?
You may need a scan tool, multimeter, and basic hand tools to diagnose and repair the issue.
9. How much does it cost to repair the P1152 code on a Hyundai?
Repair costs vary, but replacing the accelerator position sensor typically costs between $100-$300, depending on the model and labor rates.
10. Can a battery issue cause the P1152 code on a Hyundai?
A weak or failing battery may disrupt sensor signals, but it’s more likely that the issue lies within the sensor or wiring.
Discuss the causes and fixes for P1152 Hyundai OBDII Code
Code P1152 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.