P1151 Hyundai Code - Electronic Throttle System Main Accel Position Sensor 2 Malfunction
Quick Answer
The P1151 code for Hyundai vehicles indicates a malfunction in the electronic throttle system's main accelerator position sensor 2. Common causes include Faulty accelerator position sensor, Wiring issues or shorts, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1151 Hyundai indicates Electronic Throttle System Main Accel Position Sensor 2 Malfunction.
- Common causes
- Common causes include Faulty accelerator position sensor, Wiring issues or shorts, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1151 Hyundai Description
The P1151 code for Hyundai vehicles indicates a malfunction in the electronic throttle system's main accelerator position sensor 2. The accelerator position sensor is a crucial component that communicates the position of the accelerator pedal to the engine control module (ECM). This information is used by the ECM to adjust the fuel injection and ignition timing for optimal engine performance.
Common Causes of P1151 Hyundai
- Faulty accelerator position sensor
- Wiring issues or shorts
- ECM malfunction
- Environmental factors such as moisture or corrosion
- Poor electrical connections
Symptoms of P1151 Hyundai
- Engine hesitation or lack of power
- Rough idling or stalling
- Reduced fuel efficiency
- Check Engine Light illuminated
- Limp mode activation
How to Fix P1151 Hyundai
- Diagnose the issue using a scan tool to confirm the P1151 code and test the accelerator position sensor.
- Inspect wiring harness and connections for any damage or corrosion.
- Replace the faulty accelerator position sensor if needed.
- Clear the code and perform a test drive to ensure the issue is resolved.
- If the problem persists, further diagnosis may be necessary to identify any underlying ECM issues.
Cost to Fix P1151 Hyundai
The typical repair costs for addressing a P1151 code on a Hyundai vehicle can vary depending on the specific cause of the issue. In general, replacing the accelerator position sensor can cost between $150 and $300, including parts and labor. Additional diagnostic and testing fees may apply, with total repair costs ranging from $200 to $500. It is important to note that labor rates and part prices can vary based on location and the specific model of the vehicle. It is advisable to consult with a local auto repair shop for a more accurate estimate.
Need more information about the P1151 Hyundai code?
Need more information on how to fix the P1151 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1151 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1151 Hyundai Code
What does the OBDII code P1151 mean for Hyundai vehicles?
P1151 indicates a malfunction in the Electronic Throttle System, specifically related to Accelerator Position Sensor 2.
What are the common symptoms of P1151 in Hyundai vehicles?
Symptoms include reduced engine performance, difficulty accelerating, the check engine light turning on, and potential limp mode activation.
What causes the P1151 code in Hyundai vehicles?
Common causes include a faulty accelerator position sensor, damaged wiring or connectors, or issues with the electronic throttle control system.
Can I drive my Hyundai with the P1151 code active?
Driving with this code is not recommended as it can lead to reduced performance, safety issues, and potential damage to the throttle system.
How is P1151 diagnosed in Hyundai vehicles?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the accelerator position sensor, and checking the throttle system wiring and connectors for damage.
How do you fix the P1151 code on a Hyundai?
Repairs may include replacing the accelerator position sensor, repairing damaged wiring or connectors, or recalibrating the throttle system.
Is the P1151 code expensive to repair on a Hyundai?
Costs vary depending on the issue, but replacing an accelerator position sensor typically costs between $100 and $300, excluding labor.
Can cleaning the throttle body fix the P1151 code?
Cleaning the throttle body might help if dirt or carbon buildup is affecting sensor readings, but it’s not always the solution for this specific code.
What tools are needed to fix the P1151 code?
Basic tools include an OBDII scanner, multimeter for electrical testing, and appropriate wrenches or screwdrivers for sensor replacement.
Will the P1151 code clear itself after repairs?
The code may clear after repairs if the issue is resolved, but it’s often necessary to use an OBDII scanner to manually reset the check engine light.
Discuss the causes and fixes for P1151 Hyundai OBDII Code
Code P1151 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.