P1150 TOYOTA RAV4 2.0 - Air/Fuel Ratio Sensor Circuit Range/Performance Malfunction Bank 2 Sensor 1
P1150 TOYOTA RAV4 2.0 Possible Causes
- Faulty Air fuel Ratio (A/F) Bank 2 Sensor 1
- Air fuel Ratio (A/F) Bank 2 Sensor 1 harness is open or shorted
- Air fuel Ratio (A/F) Bank 2 Sensor 1 circuit poor electrical connection
- Fuel pressure
- Fuel injector
- Intake air leaks
How do I fix code P1150 TOYOTA RAV4 2.0?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the P1150 TOYOTA RAV4 2.0 code
Labor: 1.0The cost of diagnosing the P1150 TOYOTA RAV4 2.0 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the code detected?The 1150 code is set when A/F sensor output voltage change value is not what the Engine Control Module (ECM) is expecting.
- Engine Light ON (or Service Engine Soon Warning Light)
P1150 TOYOTA RAV4 2.0 MeaningThe Air-Fuel ratio (A/F) sensor varies its output voltage in proportion to the air-fuel ratio. Based on the output voltage, the Engine Control Module (ECM) determines if the air-fuel ratio is RICH or LEAN and adjusts the stoichiometric air-fuel ratio. The ECM also checks the fuel injection volume compensation value to check if the A/F sensor is deteriorating or not. A/F sensor response deterioration is determined by the ratio of the A/F sensor output voltage variation and fuel trim variation.
P1150 TOYOTA RAV4 2.0 More InformationNeed more information on how to fix the P1150 TOYOTA RAV4 2.0 code?
Get Access to Factory Service Manuals