P1147 2005 NISSAN ALTIMA SEDAN - Heated Oxygen Sensor 2 Maximum Voltage Monitoring Bank 1
P1147 2005 NISSAN ALTIMA SEDAN Possible Causes
- Faulty heated oxygen (O2) sensor 2 (rear)
- Intake air leaks
- Heated oxygen (O2) sensor 2 (rear) harness is open or shorted
- Heated oxygen (O2) sensor 2 (rear) circuit poor electrical connection
- Inappropriate fuel pressure
- Faulty fuel injectors
How is the P1147 2005 NISSAN ALTIMA SEDAN code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the P1147 2005 NISSAN ALTIMA SEDAN code
Labor: 1.0The cost to diagnose the P1147 2005 NISSAN ALTIMA SEDAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
When is the code detected?The P1147 code is triggered when the maximum voltage from the sensor is not reached to the specified voltage.
- Engine Light ON (or Service Engine Soon Warning Light)
- Possible high fuel consumption
- Possible excessive smoke from exhaust
P1147 2005 NISSAN ALTIMA SEDAN MeaningThe Heated Oxygen Sensor 2 (HO2S) (Rear O2 Sensor), after three way catalyst (manifold), monitors the oxygen level in the exhaust gas on each bank. For optimum catalyst operation, the air fuel mixture (air-fuel ratio) must be maintained near the ideal stoichiometric ratio. The HO2S output voltage changes suddenly in the vicinity of the stoichiometric ratio. The Engine Control Module (ECM) adjusts the fuel injection time so that the air-fuel ratio is nearly stoichiometric. The HO2S generates a voltage between 0.1 and 0.9 V in response to oxygen in the exhaust gas. If the oxygen in the exhaust gas increases, the air-fuel ratio becomes Lean. The ECM interprets Lean when the HO2S voltage is below 0.45 V. If the oxygen in the exhaust gas decreases, the air-fuel ratio becomes Rich. The ECM interprets Rich when the HO2S voltage is above 0.45 V.
More InformationNeed more information on how to fix the P1147 2005 NISSAN ALTIMA SEDAN code?
Get Access to Factory Service Manuals