P113F 2014 GMC Sierra Code - Exhaust Gas Temperature Sensor 5 Not Plausible
Quick Answer
The P113F diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Exhaust Gas Temperature (EGT) Sensor 5, specifically that the data being reported by the sensor is not plausible. Common causes include Faulty EGT Sensor 5, Wiring or connector issues, Exhaust system leaks. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P113F 2014 GMC Sierra indicates Exhaust Gas Temperature Sensor 5 Not Plausible.
- Common causes
- Common causes include Faulty EGT Sensor 5, Wiring or connector issues, Exhaust system leaks.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P113F 2014 GMC Sierra Description
The P113F diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Exhaust Gas Temperature (EGT) Sensor 5, specifically that the data being reported by the sensor is not plausible. The EGT sensor is responsible for monitoring the temperature of the exhaust gases leaving the engine. This information is crucial for the engine control module (ECM) to adjust fuel delivery and timing to optimize performance and reduce emissions.
Common Causes of P113F 2014 GMC Sierra
- Faulty EGT Sensor 5
- Wiring or connector issues
- Exhaust system leaks
- ECM software glitches
- Exhaust gas recirculation (EGR) system problems
Symptoms of P113F 2014 GMC Sierra
- Decreased fuel economy
- Loss of power
- Engine misfires
- Rough idling
- Increased emissions
How to Fix P113F 2014 GMC Sierra
- Begin by inspecting the wiring and connectors associated with the EGT Sensor 5. Look for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
- Test the EGT Sensor 5 using a multimeter to ensure it is functioning correctly. Replace the sensor if it is faulty.
- Check for any exhaust leaks in the system that could be affecting the sensor readings. Repair leaks as needed.
- Perform a diagnostic scan to reset the ECM and clear the fault code. Drive the vehicle to monitor for any recurring issues.
- If the problem persists, consider updating the ECM software or inspecting the EGR system for potential malfunctions.
Cost to Fix P113F 2014 GMC Sierra
The cost of repairing a P113F code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. In general, the cost of replacing an EGT Sensor 5 can range from $100 to $300, including parts and labor. Additional costs may be incurred if wiring repairs or ECM software updates are necessary. It's recommended to consult with a qualified mechanic to get an accurate estimate based on your vehicle's specific needs. Keep in mind that labor rates at auto repair shops can vary, so it's advisable to check local rates for a more precise cost estimate.
Need more information about the P113F 2014 GMC Sierra code?
Need more information on how to fix the P113F 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P113F 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P113F 2014 GMC Sierra Code
1. What does the OBDII code P113F mean on a 2014 GMC Sierra?
P113F indicates that the Exhaust Gas Temperature (EGT) Sensor 5 is reporting values that are not plausible, meaning the readings are outside the expected range.
2. What are the common symptoms of P113F on a 2014 GMC Sierra?
Symptoms may include the check engine light illuminating, reduced engine performance, poor fuel efficiency, or the truck entering limp mode.
3. What causes the P113F code to appear?
Common causes include a faulty EGT sensor, damaged wiring or connectors, soot buildup on the sensor, or issues with the engine control module (ECM).
4. Can I drive my 2014 GMC Sierra with a P113F code?
Driving with a P113F code is not recommended, as it can lead to reduced performance, emissions problems, or potential damage to the exhaust system.
5. How do I diagnose the P113F code on my 2014 GMC Sierra?
Diagnosis involves inspecting the EGT Sensor 5 and its wiring, checking for soot or physical damage, and using a scan tool to monitor sensor readings for irregularities.
6. How do I fix a P113F code on a 2014 GMC Sierra?
Repairs may include replacing the EGT Sensor 5, cleaning soot buildup, repairing damaged wiring, or updating the ECM software if necessary.
7. What is the role of the Exhaust Gas Temperature Sensor 5 in the 2014 GMC Sierra?
The EGT Sensor 5 monitors exhaust gas temperatures to help the ECM manage emissions and protect the exhaust system components.
8. How much does it cost to repair a P113F code on a 2014 GMC Sierra?
Repair costs vary but typically range from $100 to $300, depending on whether the sensor needs replacement or if other components are involved.
9. Can a dirty EGR valve cause the P113F code?
While a dirty EGR valve may contribute to exhaust-related issues, P113F specifically points to a problem with EGT Sensor 5 or its associated wiring.
10. Will clearing the code fix the P113F issue permanently?
Clearing the code may temporarily turn off the check engine light, but the root problem must be addressed to prevent the code from returning.
Discuss the causes and fixes for P113F 2014 GMC Sierra OBDII Code
Code P113F 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.