P113E GMC Code - Exhaust Gas Temperature Sensor 4 Not Plausible
Quick Answer
The P113E GMC code indicates that there is an issue with the Exhaust Gas Temperature Sensor 4, specifically that the data being received from this sensor is not plausible or accurate. Common causes include Faulty Exhaust Gas Temperature Sensor 4, Wiring or connector issues, Damaged sensor harness. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P113E GMC indicates Exhaust Gas Temperature Sensor 4 Not Plausible.
- Common causes
- Common causes include Faulty Exhaust Gas Temperature Sensor 4, Wiring or connector issues, Damaged sensor harness.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P113E GMC Description
The P113E GMC code indicates that there is an issue with the Exhaust Gas Temperature Sensor 4, specifically that the data being received from this sensor is not plausible or accurate. This sensor is responsible for monitoring the temperature of the exhaust gases leaving the engine. The information gathered by this sensor is crucial for the engine control module to adjust fuel delivery and optimize performance. When the sensor provides incorrect data or fails altogether, it can lead to a variety of performance issues and potential long-term damage to the engine.
Common Causes of P113E GMC
- Faulty Exhaust Gas Temperature Sensor 4
- Wiring or connector issues
- Damaged sensor harness
- Engine control module malfunction
- Exhaust system leaks or restrictions
Symptoms of P113E GMC
- Reduced fuel efficiency
- Rough idling
- Hesitation or stalling during acceleration
- Engine misfires
- Failed emissions tests
How to Fix P113E GMC
- Begin by conducting a thorough inspection of the Exhaust Gas Temperature Sensor 4, wiring, and connectors for any visible damage or corrosion.
- Test the sensor using a multimeter to check for proper resistance and voltage readings.
- Replace the Exhaust Gas Temperature Sensor 4 if it is found to be faulty.
- Clear the diagnostic trouble codes from the engine control module and perform a test drive to ensure the issue has been resolved.
- If the problem persists, further diagnostic testing may be required to identify any underlying issues with the engine control module or exhaust system.
Cost to Fix P113E GMC
The typical repair costs for addressing the P113E GMC code can vary depending on the specific cause of the issue. In general, replacing the Exhaust Gas Temperature Sensor 4 and addressing any related wiring or connector issues can range from $150 to $300 in parts and labor. However, additional costs may apply if further diagnostics or repairs are needed. It is recommended to consult with a qualified mechanic or auto repair shop to obtain a more accurate estimate based on the vehicle's make and model, as well as the extent of the repairs required. Labor rates at auto repair shops typically range from $80 to $150 per hour, but can vary based on location and other factors.
Need more information about the P113E GMC code?
Need more information on how to fix the P113E GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P113E GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P113E 2014 GMC Sierra — Exhaust Gas Temperature Sensor 4 Not Plausible
- P113E 2015 GMC Sierra — Exhaust Gas Temperature Sensor 4 Not Plausible
- P113E 2016 GMC Sierra — Exhaust Gas Temperature Sensor 4 Not Plausible
- P113E 2017 GMC Sierra — Exhaust Gas Temperature Sensor 4 Not Plausible
- P113E 2018 GMC Sierra — Exhaust Gas Temperature Sensor 4 Not Plausible
Frequently Asked Questions about P113E GMC Code
1. What are common symptoms of OBDII code P113E GMC (Exhaust Gas Temperature Sensor 4 Not Plausible)?
The common symptoms include poor engine performance, decreased fuel efficiency, and the illumination of the Check Engine Light.
2. What causes OBDII code P113E GMC to trigger?
The code is typically triggered due to a faulty exhaust gas temperature sensor, wiring issues, or problems with the engine control module (ECM).
3. How serious is OBDII code P113E GMC?
While the code may not cause immediate harm to your vehicle, it can lead to reduced engine efficiency and potential long-term damage if left unaddressed.
4. Can I continue driving with OBDII code P113E GMC?
It is not recommended to continue driving with this code as it can affect your vehicle's performance and fuel economy. It's best to address the issue as soon as possible.
5. How do I diagnose OBDII code P113E GMC?
Diagnosing the code involves using a scan tool to retrieve the specific details of the code and inspecting the exhaust gas temperature sensor and related components for any faults.
6. How can I repair OBDII code P113E GMC?
Repairing the code may involve replacing the faulty exhaust gas temperature sensor, repairing any damaged wiring, or reprogramming the engine control module (ECM) if necessary.
7. Will resetting the OBDII code P113E GMC make it go away permanently?
Resetting the code may temporarily turn off the Check Engine Light, but if the underlying issue is not fixed, the code is likely to reappear.
8. Can a DIY enthusiast fix OBDII code P113E GMC at home?
While some experienced DIY enthusiasts may be able to address this code at home, it's recommended to seek professional assistance to accurately diagnose and repair the issue.
9. How much does it cost to repair OBDII code P113E GMC at a mechanic?
The repair costs can vary depending on the exact cause of the code, but typically, it may range from $100 to $300 for parts and labor.
10. How often does OBDII code P113E GMC occur in GMC vehicles?
The occurrence of this specific code can vary, but it has been reported in various GMC models, especially those equipped with exhaust gas temperature sensors.
Discuss the causes and fixes for P113E GMC OBDII Code
Code P113E GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.