P1137 Mercury Code - Lack Of Heated Oxygen Sensor Switches Bank 1 Sensor 2 Switch Indicates Lean
Quick Answer
The P1137 diagnostic trouble code (DTC) for Mercury vehicles indicates a lack of heated oxygen sensor switches on Bank 1 Sensor 2, which indicates a lean air-fuel mixture. Common causes include Faulty Oxygen Sensor: A malfunctioning oxygen sensor can fail to provide accurate readings, causing the ECM to misinterpret the air-fuel ratio, Air Leak in Exhaust System: Any leaks in the exhaust system, such as a cracked exhaust manifold or damaged gasket, can introduce excess air into the system, leading to a lean mixture, Vacuum Leak: A vacuum leak in the intake manifold or vacuum hoses can disrupt the air-fuel ratio, causing the sensor to detect a lean condition. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1137 Mercury indicates Lack Of Heated Oxygen Sensor Switches Bank 1 Sensor 2 Switch Indicates Lean.
- Common causes
- Common causes include Faulty Oxygen Sensor: A malfunctioning oxygen sensor can fail to provide accurate readings, causing the ECM to misinterpret the air-fuel ratio, Air Leak in Exhaust System: Any leaks in the exhaust system, such as a cracked exhaust manifold or damaged gasket, can introduce excess air into the system, leading to a lean mixture, Vacuum Leak: A vacuum leak in the intake manifold or vacuum hoses can disrupt the air-fuel ratio, causing the sensor to detect a lean condition.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1137 Mercury Description
The P1137 diagnostic trouble code (DTC) for Mercury vehicles indicates a lack of heated oxygen sensor switches on Bank 1 Sensor 2, which indicates a lean air-fuel mixture. The oxygen sensor, also known as the O2 sensor, plays a crucial role in monitoring the oxygen levels in the exhaust gases. The sensor sends signals to the engine control module (ECM) to adjust the air-fuel ratio for optimal combustion efficiency.
Common Causes of P1137 Mercury
- Faulty Oxygen Sensor: A malfunctioning oxygen sensor can fail to provide accurate readings, causing the ECM to misinterpret the air-fuel ratio.
- Air Leak in Exhaust System: Any leaks in the exhaust system, such as a cracked exhaust manifold or damaged gasket, can introduce excess air into the system, leading to a lean mixture.
- Vacuum Leak: A vacuum leak in the intake manifold or vacuum hoses can disrupt the air-fuel ratio, causing the sensor to detect a lean condition.
- Fuel System Issues: Problems with the fuel injectors, fuel pressure regulator, or fuel pump can result in an inadequate fuel supply, leading to a lean mixture.
Symptoms of P1137 Mercury
- Check Engine Light: The most common symptom associated with the P1137 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A lean air-fuel mixture can result in reduced fuel efficiency, as the engine may be running inefficiently.
- Rough Idling: The engine may experience rough idling or hesitation when the air-fuel mixture is lean.
- Engine Misfires: An excessively lean mixture can lead to engine misfires, causing the vehicle to run erratically or lose power.
- Increased Emissions: A lean air-fuel mixture can result in higher emissions, potentially causing the vehicle to fail emissions tests.
How to Fix P1137 Mercury
- Diagnose the Issue: Use an OBD-II scanner to retrieve the specific DTC and pinpoint the cause of the lean air-fuel mixture.
- Inspect Oxygen Sensor: Check the Bank 1 Sensor 2 oxygen sensor for any damage or contamination, and replace if necessary.
- Check for Exhaust Leaks: Inspect the exhaust system for any leaks or damage that could introduce excess air into the system, and repair as needed.
- Address Vacuum Leaks: Check the intake manifold and vacuum hoses for leaks, and replace any damaged components to restore the proper air-fuel ratio.
- Verify Fuel System Functionality: Test the fuel injectors, fuel pressure regulator, and fuel pump to ensure they are functioning correctly and providing the right amount of fuel.
Cost to Fix P1137 Mercury
The cost of repairing a P1137 code on a Mercury vehicle can vary depending on the specific cause of the issue and the labor rates at auto repair shops. On average, the cost of replacing an oxygen sensor can range from $100 to $300, including parts and labor. However, if additional repairs are needed, such as fixing exhaust leaks or addressing fuel system issues, the total cost could increase. It's recommended to obtain a personalized estimate from a qualified mechanic or auto repair shop based on the specific symptoms and underlying causes of the P1137 code.
Need more information about the P1137 Mercury code?
Need more information on how to fix the P1137 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1137 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1137 Mercury Code
No Frequently Asked Questions about P1137 Mercury Code found.
Discuss the causes and fixes for P1137 Mercury OBDII Code
Code P1137 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.