P1137 BUICK - HO2S Circuit Low Voltage Sensor 2
P1137 BUICK Possible Causes
- Faulty HO2S Bank 1 Sensor 2
- HO2S Bank 1 Sensor 2 harness is open or shorted
- HO2S Bank 1 Sensor 2 circuit poor electrical connection
How is the P1137 BUICK code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
What is the cost to diagnose the P1137 BUICK code
Labor: 1.0The cost to diagnose the P1137 BUICK code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
P1137 BUICK MeaningIn order to control emissions, a catalytic converter converts any harmful exhaust emissions into harmless water vapor and carbon dioxide. The Powertrain Control Module (PCM) can monitor this process by using a rear Heated Oxygen Sensor 2 (HO2S 2). The HO2S 2, located in the exhaust stream past the catalytic converter, produces an output signal which indicates the storage capacity of the catalyst. This signal indicates the catalyst's ability to effectively convert the exhaust emissions. If the catalyst is functioning properly, the HO2S 2 signal will be far less active than the signal produced by the front Heated Oxygen Sensor 1 (HO2S 1).
More InformationNeed more information on how to fix the P1137 BUICK code?
Get Access to Factory Service Manuals