P1134 ACURA - HO2S Transition Time Ratio 11

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P1134 ACURA Possible Causes

  • Faulty Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1
  • Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 harness is open or shorted
  • Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 circuit poor electrical conection
  • Air leak in exhaust near O2 sensor

How do I fix code P1134 ACURA

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1134 ACURA code

    Labor: 1.0

    The cost of diagnosing the P1134 ACURA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P1134 ACURA code detected?

If the Powertrain Control Module (PCM) determines that the front HO2S did not switch enough times, the PCM will set the P1133 code.

P1134 ACURA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1134 ACURA Meaning

The Engine Control Module (ECM) monitors the Heated Oxygen Sensor (HO2S) activity for 90 seconds after closed loop operation has begun. The ECM determines if the front HO2S is functioning properly by counting the number of HO2S-1 Lean/Rich (L/R) and Rich/Lean (R/L) switches.
OBDII Code P1134 ACURA - HO2S Transition Time Ratio 11 - Engine-Codes.com

P1134 ACURA More Information

Need more information on how to fix the P1134 ACURA code?
Get Access to Factory Service Manuals

Related Information