P1133 HONDA - HO2S Insufficient Switching Sensor 1

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P1133 HONDA Possible Causes

  • Faulty Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1
  • Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 harness is open or shorted
  • Heated Oxygen Sensor (HO2S) Bank 1 Sensor 1 circuit poor electrical conection
  • Air leak in exhaust near O2 sensor

How do I fix code P1133 HONDA

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1133 HONDA code

    Labor: 1.0

    The cost of diagnosing the P1133 HONDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P1133 HONDA code detected?

If the Powertrain Control Module (PCM) determines that the front HO2S did not switch enough times, the PCM will set the P1133 code.

P1133 HONDA Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1133 HONDA Meaning

The Engine Control Module (ECM) monitors the Heated Oxygen Sensor (HO2S) activity for 90 seconds after closed loop operation has begun. The ECM determines if the front HO2S is functioning properly by counting the number of HO2S-1 Lean/Rich (L/R) and Rich/Lean (R/L) switches.
OBDII Code P1133 HONDA - HO2S Insufficient Switching Sensor 1 - Engine-Codes.com

P1133 HONDA More Information

Need more information on how to fix the P1133 HONDA code?
Get Access to Factory Service Manuals

Related Information