P1133 2014 GMC Sierra Code - HO2S Insufficient Switching Bank 1 Sensor 1
Quick Answer
The P1133 diagnostic trouble code (DTC) for a 2014 GMC Sierra refers to an issue with the Heated Oxygen Sensor (HO2S) on Bank 1 Sensor 1. Common causes include Faulty HO2S on Bank 1 Sensor 1, Wiring or connector issues in the HO2S circuit, Exhaust leaks near the HO2S. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1133 2014 GMC Sierra indicates HO2S Insufficient Switching Bank 1 Sensor 1.
- Common causes
- Common causes include Faulty HO2S on Bank 1 Sensor 1, Wiring or connector issues in the HO2S circuit, Exhaust leaks near the HO2S.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1133 2014 GMC Sierra Description
The P1133 diagnostic trouble code (DTC) for a 2014 GMC Sierra refers to an issue with the Heated Oxygen Sensor (HO2S) on Bank 1 Sensor 1. This sensor is responsible for monitoring the oxygen levels in the exhaust gases and sending this information to the engine control module (ECM) for proper air-fuel ratio adjustments. When the ECM detects that the HO2S on Bank 1 Sensor 1 is not switching between rich and lean air-fuel mixtures quickly enough, it triggers the P1133 code.
Common Causes of P1133 2014 GMC Sierra
- Faulty HO2S on Bank 1 Sensor 1
- Wiring or connector issues in the HO2S circuit
- Exhaust leaks near the HO2S
- Vacuum leaks in the intake system
- Engine misfires affecting the HO2S readings
Symptoms of P1133 2014 GMC Sierra
- Check Engine Light illuminated on the dashboard
- Decreased fuel efficiency
- Rough idling or stalling
- Engine hesitation or surging
- Increased emissions output
How to Fix P1133 2014 GMC Sierra
- Begin by diagnosing the specific cause of the insufficient switching in the HO2S on Bank 1 Sensor 1 using a scan tool to monitor live data.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as necessary.
- Check for exhaust leaks near the HO2S and repair them to ensure accurate readings.
- Test the HO2S itself for proper functionality and replace if it is found to be faulty.
- Clear the DTC and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P1133 2014 GMC Sierra
The typical repair costs for addressing a P1133 code on a 2014 GMC Sierra can range from $150 to $400, depending on the specific cause of the issue and the cost of parts and labor. It is important to note that diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging from $80 to $150. Rates may be higher at dealerships or in metropolitan areas, while independent shops may offer lower prices. For a precise estimate, it is recommended to inquire about local rates before proceeding with the repair.
Tech Notes for P1133 2014 GMC Sierra
Need more information about the P1133 2014 GMC Sierra code?
Need more information on how to fix the P1133 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1133 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1133 2014 GMC Sierra Code
No Frequently Asked Questions about P1133 2014 GMC Sierra Code found.
Discuss the causes and fixes for P1133 2014 GMC Sierra OBDII Code
Code P1133 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.