OBDII Code List

P1132 INFINITI - Swirl Control Valve Circuit

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P1132 INFINITI Possible Causes

  • Faulty Swirl Control Valve
  • Swirl Control Valve harness is open or shorted
  • Swirl Control Valve circuit poor electrical connection

How do I fix code P1132 INFINITI

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1132 INFINITI code

    Labor: 1.0

    The cost of diagnosing the P1132 INFINITI code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P1132 INFINITI code detected?

An improper voltage signal is sent to Engine Control Module (ECM).

P1132 INFINITI Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1132 INFINITI Meaning

Swirl control valve consists of actuator and valve. The valve is installed in the intake manifold, and the actuator is connected to the rear end of the valve shaft.
The swirl control valve uses a step motor which has four winding phases. It operates according to the output pulse signal of the Engine Control Module (ECM). Two windings are turned ON and OFF in sequence. Each time an ON pulse is issued, the valve opens or closes. When no change in the control position is needed, the ECM does not issue the pulse signal. A certain voltage signal is issued so that the valve remains at that particular opening.
OBDII Code P1132 INFINITI - Swirl Control Valve Circuit - Engine-Codes.com

P1132 INFINITI More Information

Need more information on how to fix the P1132 INFINITI code?
Get Access to Factory Service Manuals

Related Information