P112D GMC Code - Intake Air Temperature Sensor 3 Circuit High Voltage
Quick Answer
The P112D GMC code indicates a problem with the Intake Air Temperature Sensor 3 Circuit, specifically a high voltage issue. Common causes include Faulty Intake Air Temperature Sensor: The sensor itself may be malfunctioning, causing it to send incorrect voltage readings to the ECM, Wiring or Connection Problems: Issues with the wiring or connections related to the Intake Air Temperature Sensor can lead to high voltage readings, Damaged Sensor Connector: A damaged or corroded sensor connector can disrupt the signal between the sensor and the ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P112D GMC indicates Intake Air Temperature Sensor 3 Circuit High Voltage.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor: The sensor itself may be malfunctioning, causing it to send incorrect voltage readings to the ECM, Wiring or Connection Problems: Issues with the wiring or connections related to the Intake Air Temperature Sensor can lead to high voltage readings, Damaged Sensor Connector: A damaged or corroded sensor connector can disrupt the signal between the sensor and the ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P112D GMC Description
The P112D GMC code indicates a problem with the Intake Air Temperature Sensor 3 Circuit, specifically a high voltage issue. The Intake Air Temperature Sensor (IAT) is a crucial component that measures the temperature of the air entering the engine. This information is used by the Engine Control Module (ECM) to adjust fuel delivery and ignition timing for optimal engine performance.
Common Causes of P112D GMC
- Faulty Intake Air Temperature Sensor: The sensor itself may be malfunctioning, causing it to send incorrect voltage readings to the ECM.
- Wiring or Connection Problems: Issues with the wiring or connections related to the Intake Air Temperature Sensor can lead to high voltage readings.
- Damaged Sensor Connector: A damaged or corroded sensor connector can disrupt the signal between the sensor and the ECM.
- ECM Malfunction: A malfunctioning Engine Control Module can also cause high voltage issues in the Intake Air Temperature Sensor circuit.
Symptoms of P112D GMC
- Check Engine Light: The most common symptom associated with this code is the illumination of the Check Engine Light on the dashboard.
- Reduced Engine Performance: The vehicle may experience a decrease in power, acceleration, and overall performance.
- Poor Fuel Efficiency: A faulty Intake Air Temperature Sensor can lead to incorrect fuel adjustments, resulting in decreased fuel efficiency.
- Rough Idling: The engine may idle roughly or inconsistently due to incorrect sensor readings.
- Emission Issues: High voltage in the Intake Air Temperature Sensor circuit can lead to increased emissions and potential environmental concerns.
How to Fix P112D GMC
- Diagnose the Issue: Use a scan tool to retrieve the specific fault code and perform a thorough inspection of the Intake Air Temperature Sensor and related components.
- Replace the Intake Air Temperature Sensor: If the sensor is found to be faulty, replace it with a new, quality sensor that matches the specifications of your vehicle.
- Check Wiring and Connections: Inspect the wiring and connections for any damage, corrosion, or loose connections. Repair or replace as needed.
- Clear Fault Codes: After the repair is completed, clear the fault codes from the ECM to reset the Check Engine Light and monitor the system for any recurring issues.
- Test Drive: Take the vehicle for a test drive to ensure that the repair has resolved the high voltage issue in the Intake Air Temperature Sensor circuit.
Cost to Fix P112D GMC
The typical repair costs for addressing a P112D GMC code related to the Intake Air Temperature Sensor circuit high voltage issue can range from $100 to $300, depending on the specific cause of the problem and the cost of parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate based on your location, vehicle make and model, and engine type.
Need more information about the P112D GMC code?
Need more information on how to fix the P112D GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P112D GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P112D GMC Code
1. What are the common symptoms of OBDII code P112D GMC (Intake Air Temperature Sensor 3 Circuit High Voltage)?
The common symptoms include poor engine performance, rough idling, decreased fuel efficiency, and in some cases, the Check Engine light may illuminate.
2. What can cause the OBDII code P112D GMC to trigger?
The code P112D GMC is typically triggered when the Intake Air Temperature Sensor 3 reports a high voltage signal to the engine control module, indicating a potential issue with the sensor or its circuit.
3. How serious is the OBDII code P112D GMC?
While the code itself may not cause immediate engine failure, it can lead to poor engine performance and decreased fuel efficiency if left unresolved. It is recommended to address the issue promptly.
4. What are some possible repair tips for OBDII code P112D GMC?
Some repair tips include checking the wiring and connectors related to the Intake Air Temperature Sensor 3, testing the sensor's functionality, and replacing the sensor if necessary.
5. Can I continue driving my vehicle with the OBDII code P112D GMC?
It is not recommended to drive your vehicle for an extended period with this code present, as it can affect engine performance and fuel efficiency. It is best to address the issue as soon as possible.
6. How can I diagnose the OBDII code P112D GMC at home?
You can use an OBDII scanner to retrieve the code and then perform a visual inspection of the Intake Air Temperature Sensor 3 and its wiring. Testing the sensor's resistance and voltage output can also help diagnose the issue.
7. Is it possible to reset the OBDII code P112D GMC without fixing the underlying problem?
While you can clear the code with an OBDII scanner, it will likely reappear if the root cause of the high voltage signal from the Intake Air Temperature Sensor 3 is not addressed.
8. How much does it cost to repair the OBDII code P112D GMC?
The cost of repairing this code can vary depending on the cause of the issue. It may involve simply replacing the sensor or could require more extensive wiring repairs, with costs ranging from $50 to $300 or more.
9. Can a faulty Intake Air Temperature Sensor 3 cause other issues in the vehicle?
Yes, a faulty sensor can impact the air-fuel mixture, ignition timing, and overall engine performance. It is essential to address any sensor-related issues promptly to prevent further complications.
10. How long does it typically take to repair the OBDII code P112D GMC?
The repair time can vary based on the extent of the issue and the availability of parts. In most cases, it can take anywhere from 1 to 3 hours to diagnose and repair the Intake Air Temperature Sensor 3 circuit high voltage problem.
Discuss the causes and fixes for P112D GMC OBDII Code
Code P112D GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.