P1128 2004 Nissan Altima Sedan Code - Throttle Control Motor Circuit Short
Quick Answer
The P1128 code for a 2004 Nissan Altima Sedan indicates a Throttle Control Motor Circuit Short. Common causes include Damaged wiring or connectors in the throttle control motor circuit, Faulty throttle control motor, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1128 2004 Nissan Altima Sedan indicates Throttle Control Motor Circuit Short.
- Common causes
- Common causes include Damaged wiring or connectors in the throttle control motor circuit, Faulty throttle control motor, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1128 2004 Nissan Altima Sedan Description
The P1128 code for a 2004 Nissan Altima Sedan indicates a Throttle Control Motor Circuit Short. This means that there is a malfunction in the circuit that controls the throttle motor, which is responsible for regulating the amount of air entering the engine. The throttle control motor is a crucial component of the vehicle's electronic throttle control system, which replaces the traditional throttle cable with an electronic system that is controlled by the vehicle's engine control module (ECM).
Common Causes of P1128 2004 Nissan Altima Sedan
- Damaged wiring or connectors in the throttle control motor circuit
- Faulty throttle control motor
- Malfunctioning ECM
- Problem with the throttle position sensor
Symptoms of P1128 2004 Nissan Altima Sedan
- Erratic idling
- Stalling
- Hesitation during acceleration
- Lack of power
- Vehicle going into "limp mode"
How to Fix P1128 2004 Nissan Altima Sedan
- Begin by conducting a thorough inspection of the throttle control motor circuit, looking for any damaged wiring or connectors. Repair or replace any damaged components.
- Test the throttle control motor using a multimeter to check for proper functionality. Replace the throttle control motor if necessary.
- Check the ECM for any signs of malfunction and perform any necessary diagnostics or repairs.
- Inspect the throttle position sensor and ensure it is functioning correctly. Replace if needed.
- Clear the diagnostic trouble codes from the vehicle's ECM and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1128 2004 Nissan Altima Sedan
The typical repair costs for addressing a Throttle Control Motor Circuit Short can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates typically range between $80 and $150 per hour, with rates potentially higher at dealerships or in metropolitan areas and lower at independent shops. It's recommended to check local rates for a more accurate estimate.
When is the Code Detected?
Need more information about the P1128 2004 Nissan Altima Sedan code?
Need more information on how to fix the P1128 2004 Nissan Altima Sedan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1128 2004 Nissan Altima Sedan code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1128 2004 Nissan Altima Sedan Code
What does the OBDII code P1128 mean for a 2004 Nissan Altima Sedan?
The P1128 code indicates a problem with the throttle control motor circuit, suggesting that the throttle position is not within the expected range.
What are the common symptoms associated with the P1128 code?
Symptoms may include decreased engine performance, erratic idling, a check engine light, or the vehicle entering limp mode.
What could cause the P1128 code to trigger?
Common causes include a faulty throttle position sensor, damaged wiring or connectors, a malfunctioning throttle body, or issues with the engine control module (ECM).
How can I diagnose the P1128 code?
Start by using an OBDII scanner to confirm the code, then inspect the throttle position sensor and wiring for damage. Checking the throttle body for proper operation is also essential.
What repairs are typically needed to fix the P1128 code?
Repairs may involve replacing the throttle position sensor, repairing damaged wiring, cleaning or replacing the throttle body, or reprogramming the ECM if necessary.
Can I drive my 2004 Nissan Altima Sedan with the P1128 code?
While it may be possible to drive the vehicle, it is not recommended, as it could lead to poor performance or potential safety issues.
How can I clear the P1128 code after repairs?
You can clear the code using an OBDII scanner or by disconnecting the battery for a few minutes, but ensure the underlying issue is resolved first.
Is there a risk of further damage if I ignore the P1128 code?
Yes, ignoring the P1128 code can lead to reduced engine efficiency, increased emissions, and potentially cause more severe engine problems over time.
What should I do if the P1128 code returns after repairs?
If the code returns, recheck the components associated with the throttle control system, as there may still be an underlying issue or a new problem that needs to be addressed.
Discuss the causes and fixes for P1128 2004 Nissan Altima Sedan OBDII Code
Code P1128 2004 Nissan Altima Sedan comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.