P1128 1996 HONDA CIVIC Code - Manifold Absolute Pressure Sensor Signal Lower Than Expected
|P1128 1996 HONDA CIVIC code possible causes
- Engine mechanical condition
- Faulty Manifold Absolute Pressure (MAP) sensor
- Manifold Absolute Pressure (MAP) sensor harness is open or shorted
- Manifold Absolute Pressure (MAP) sensor circuit poor electrical connection
|How is the P1128 1996 HONDA CIVIC code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
|What is the cost to diagnose the P1128 1996 HONDA CIVIC code
Labor: 1.0The cost to diagnose the P1128 1996 HONDA CIVIC code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
|What are P1128 1996 HONDA CIVIC code possible symptoms?
- Engine Light ON (or Service Engine Soon Warning Light)
|What is P1128 1996 HONDA CIVIC code meaning?The Manifold Absolute Pressure (MAP) sensor senses manifold absolute pressure (vacuum) and converts it into electrical signals. The MAP sensor outputs low signal voltage at high-vacuum (idling) and high signal voltage at low-vacuum (throttle valve wide open).
The engine control module (ECM) compares a predetermined MAP value at a given throttle position and manifold absolute pressure to the output voltage value of the MAP sensor.
If the MAP sensor outputs lower voltage than expected, the ECM detects a malfunction and stores a DTC.
|Need more information with the P1128 1996 HONDA CIVIC code?Need more information on how to fix the P1128 1996 HONDA CIVIC code?
Get Access to Factory Service Manuals