Engine-CodesMercury – P1125 Mercury

P1125 Mercury Code - Throttle Position Sensor Intermittent

Quick Answer

The P1125 diagnostic trouble code (DTC) for Mercury vehicles indicates an intermittent issue with the throttle position sensor (TPS). Common causes include TPS wear: Over time, the throttle position sensor may wear out, leading to intermittent signal issues, Wiring harness damage: Damage to the wiring harness connected to the TPS can cause signal interruptions, Connector issues: Loose or corroded connectors can disrupt the communication between the TPS and ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1125 Mercury indicates Throttle Position Sensor Intermittent.
Common causes
Common causes include TPS wear: Over time, the throttle position sensor may wear out, leading to intermittent signal issues, Wiring harness damage: Damage to the wiring harness connected to the TPS can cause signal interruptions, Connector issues: Loose or corroded connectors can disrupt the communication between the TPS and ECM.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1125 Mercury Description

The P1125 diagnostic trouble code (DTC) for Mercury vehicles indicates an intermittent issue with the throttle position sensor (TPS). The TPS is a crucial component of the engine management system, as it informs the engine control module (ECM) about the position of the throttle plate. This data helps the ECM adjust fuel delivery and ignition timing to optimize engine performance and efficiency.

OBDII Code P1125 Mercury - Throttle Position Sensor Intermittent
P1125 Mercury Code - Throttle Position Sensor Intermittent

Common Causes of P1125 Mercury

  1. TPS wear: Over time, the throttle position sensor may wear out, leading to intermittent signal issues.
  2. Wiring harness damage: Damage to the wiring harness connected to the TPS can cause signal interruptions.
  3. Connector issues: Loose or corroded connectors can disrupt the communication between the TPS and ECM.
  4. ECM malfunction: An issue with the engine control module can result in incorrect TPS readings and trigger the P1125 code.

Symptoms of P1125 Mercury

  1. Rough idle or stalling: The engine may idle roughly or stall intermittently due to incorrect throttle position readings.
  2. Lack of power: The vehicle may exhibit a lack of power or sluggish acceleration, especially during acceleration.
  3. Poor fuel economy: Incorrect TPS signals can lead to poor fuel efficiency, causing the vehicle to consume more fuel than usual.
  4. Check Engine Light: The Check Engine Light may illuminate on the dashboard, indicating a problem with the throttle position sensor.

How to Fix P1125 Mercury

  1. Diagnose the issue: Use a scan tool to retrieve the trouble code and inspect the throttle position sensor, wiring, and connectors for any visible damage.
  2. Replace the throttle position sensor: If the TPS is faulty, replace it with a new one following the manufacturer's guidelines.
  3. Repair wiring harness: Repair or replace damaged wiring harness components to ensure proper signal transmission.
  4. Check connectors: Clean or replace any corroded or loose connectors to establish a secure connection.
  5. Clear codes and test drive: Clear the trouble codes from the ECM, reset the system, and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P1125 Mercury

The cost of repairing a P1125 code for a Mercury vehicle can vary depending on the labor rates and parts required. On average, the cost of replacing a throttle position sensor ranges from $100 to $200, including parts and labor. However, additional costs may apply if wiring harness repairs or ECM diagnostics are needed.

When is the Code Detected?

Engine Control Module (ECM) detected the Thottle Position (TP) sensor voltage extended above or below calibrated limits

Need more information about the P1125 Mercury code?

Need more information on how to fix the P1125 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1125 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1125 Mercury Code

No Frequently Asked Questions about P1125 Mercury Code found.

Discuss the causes and fixes for P1125 Mercury OBDII Code

Code P1125 Mercury comments

No comments found for this page.