P1123 Mercury Code - Throttle Position Sensor Circuit Intermittent High Voltage
Quick Answer
The P1123 diagnostic trouble code (DTC) for Mercury vehicles indicates an issue with the Throttle Position Sensor (TPS) circuit experiencing intermittent high voltage. Common causes include Faulty Throttle Position Sensor: The TPS itself may be malfunctioning, sending incorrect voltage readings to the ECM, Wiring issues: Damaged or corroded wiring connecting the TPS to the ECM can disrupt the voltage signals, ECM malfunction: A problem with the Engine Control Module can also cause the TPS circuit to register high voltage intermittently. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1123 Mercury indicates Throttle Position Sensor Circuit Intermittent High Voltage.
- Common causes
- Common causes include Faulty Throttle Position Sensor: The TPS itself may be malfunctioning, sending incorrect voltage readings to the ECM, Wiring issues: Damaged or corroded wiring connecting the TPS to the ECM can disrupt the voltage signals, ECM malfunction: A problem with the Engine Control Module can also cause the TPS circuit to register high voltage intermittently.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1123 Mercury Description
The P1123 diagnostic trouble code (DTC) for Mercury vehicles indicates an issue with the Throttle Position Sensor (TPS) circuit experiencing intermittent high voltage. The TPS is a crucial component of the engine management system, as it communicates the position of the throttle to the Engine Control Module (ECM). This information is vital for the ECM to adjust fuel delivery and ignition timing, ensuring optimal engine performance and efficiency.
Common Causes of P1123 Mercury
- Faulty Throttle Position Sensor: The TPS itself may be malfunctioning, sending incorrect voltage readings to the ECM.
- Wiring issues: Damaged or corroded wiring connecting the TPS to the ECM can disrupt the voltage signals.
- ECM malfunction: A problem with the Engine Control Module can also cause the TPS circuit to register high voltage intermittently.
- Poor electrical connections: Loose or poor electrical connections between components can lead to voltage spikes in the TPS circuit.
Symptoms of P1123 Mercury
- Rough idling or stalling: The engine may struggle to maintain a steady idle or stall out intermittently.
- Poor acceleration: The vehicle may experience sluggish or delayed acceleration due to incorrect fuel delivery.
- Decreased fuel efficiency: The engine may consume more fuel than usual, resulting in decreased mileage.
- Check Engine Light: The Check Engine Light may illuminate on the dashboard to indicate a problem with the TPS circuit.
How to Fix P1123 Mercury
- Diagnose the issue: Use a diagnostic scanner to retrieve the specific DTC (P1123) and perform a thorough inspection of the TPS, wiring, and ECM.
- Replace the Throttle Position Sensor: If the TPS is found to be faulty, replace it with a new, OEM-quality sensor.
- Repair or replace damaged wiring: Address any wiring issues by repairing or replacing damaged wires to ensure a secure connection.
- Check ECM functionality: Verify the ECM's functionality and address any underlying issues that may be causing the high voltage readings.
- Clear DTC and test drive: After repairs are completed, clear the DTC from the ECM memory and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1123 Mercury
The typical repair costs for addressing a P1123 code on a Mercury vehicle can vary depending on the specific model and year of the vehicle, as well as the extent of the issue. In general, replacing a Throttle Position Sensor can cost between $100 and $200 for parts, with additional labor costs ranging from $100 to $200. However, these estimates can fluctuate based on the location of the repair shop, the hourly labor rates, and any additional diagnostic time required. It is advisable to consult with a professional mechanic or dealership to obtain a more accurate cost estimate for addressing the P1123 code on your Mercury vehicle.
Need more information about the P1123 Mercury code?
Need more information on how to fix the P1123 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1123 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1123 Mercury Code
No Frequently Asked Questions about P1123 Mercury Code found.
Discuss the causes and fixes for P1123 Mercury OBDII Code
Code P1123 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.