P1117 Mercury Code - Engine Coolant Temperature Sensor Intermittent
Quick Answer
The P1117 code for a Mercury vehicle indicates an intermittent issue with the engine coolant temperature sensor. Common causes include Faulty Sensor: The most common cause of this code is a malfunctioning engine coolant temperature sensor, Wiring Issues: Corrosion, damage, or loose connections in the wiring harness connected to the sensor can also trigger this code, Coolant Level: Low coolant levels or air pockets in the cooling system can affect the sensor's ability to accurately measure temperature. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1117 Mercury indicates Engine Coolant Temperature Sensor Intermittent.
- Common causes
- Common causes include Faulty Sensor: The most common cause of this code is a malfunctioning engine coolant temperature sensor, Wiring Issues: Corrosion, damage, or loose connections in the wiring harness connected to the sensor can also trigger this code, Coolant Level: Low coolant levels or air pockets in the cooling system can affect the sensor's ability to accurately measure temperature.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1117 Mercury Description
The P1117 code for a Mercury vehicle indicates an intermittent issue with the engine coolant temperature sensor. This sensor is responsible for monitoring the temperature of the engine coolant and sending this information to the engine control module (ECM). The ECM uses this data to adjust fuel delivery and ignition timing to ensure optimal engine performance and efficiency. An intermittent problem with this sensor can lead to inaccurate temperature readings, which can result in poor engine performance, reduced fuel economy, and potential overheating issues.
Common Causes of P1117 Mercury
- Faulty Sensor: The most common cause of this code is a malfunctioning engine coolant temperature sensor.
- Wiring Issues: Corrosion, damage, or loose connections in the wiring harness connected to the sensor can also trigger this code.
- Coolant Level: Low coolant levels or air pockets in the cooling system can affect the sensor's ability to accurately measure temperature.
- ECM Malfunction: In rare cases, a problem with the engine control module could cause intermittent issues with the coolant temperature sensor.
Symptoms of P1117 Mercury
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
- Inaccurate Temperature Gauge: The temperature gauge on the dashboard may fluctuate erratically or show incorrect readings.
- Poor Fuel Economy: A faulty coolant temperature sensor can cause the engine to run rich or lean, leading to decreased fuel efficiency.
- Engine Overheating: In severe cases, an intermittent coolant temperature sensor can result in engine overheating due to inaccurate temperature readings.
- Rough Idling: The engine may idle roughly or stall due to incorrect temperature data affecting fuel delivery.
How to Fix P1117 Mercury
- Diagnostic Testing: Begin by using a scan tool to retrieve the specific trouble code and perform diagnostic testing to confirm the issue with the coolant temperature sensor.
- Sensor Replacement: If the sensor is faulty, it will need to be replaced. Locate the sensor on the engine block or radiator, disconnect the wiring harness, and remove the sensor before installing a new one.
- Wiring Inspection: Check the wiring harness for any damage, corrosion, or loose connections. Repair or replace any faulty wiring as needed.
- Coolant System Check: Verify proper coolant levels and bleed any air from the cooling system to ensure accurate temperature readings.
- Clear Codes: After completing the repair, clear the trouble codes from the ECM memory and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P1117 Mercury
The cost of repairing a P1117 code for an engine coolant temperature sensor intermittent issue can vary depending on the make and model of the vehicle, the location of the repair shop, and the labor rates. On average, the parts cost for a new sensor can range from $50 to $150, while the labor cost can range from $100 to $200. Overall, the total repair cost may fall between $150 and $350. It's recommended to consult with a local auto repair shop for a more accurate estimate based on your specific vehicle and location.
Tech Notes for P1117 Mercury
Need more information about the P1117 Mercury code?
Need more information on how to fix the P1117 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1117 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1117 Mercury Code
No Frequently Asked Questions about P1117 Mercury Code found.
Discuss the causes and fixes for P1117 Mercury OBDII Code
Code P1117 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.