P1117 BMW Code - Mass Or Volume Air Flow Circuit Low Input Bank 2
Quick Answer
The P1117 BMW code indicates a problem with the Mass or Volume Air Flow Circuit on Bank 2 of the vehicle. Common causes include Dirty or faulty Mass Air Flow (MAF) sensor, Vacuum leaks in Bank 2, Wiring issues or electrical problems. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1117 BMW indicates Mass Or Volume Air Flow Circuit Low Input Bank 2.
- Common causes
- Common causes include Dirty or faulty Mass Air Flow (MAF) sensor, Vacuum leaks in Bank 2, Wiring issues or electrical problems.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1117 BMW Description
The P1117 BMW code indicates a problem with the Mass or Volume Air Flow Circuit on Bank 2 of the vehicle. The Mass Air Flow (MAF) sensor is a critical component of the engine management system, responsible for measuring the amount of air entering the engine. This information is used by the engine control module to determine the appropriate air-fuel mixture for combustion. When the MAF sensor detects a low input signal on Bank 2, it means that there is a potential issue with the air flow in that specific bank of cylinders.
Common Causes of P1117 BMW
- Dirty or faulty Mass Air Flow (MAF) sensor
- Vacuum leaks in Bank 2
- Wiring issues or electrical problems
- Clogged air filter on Bank 2
- Issues with the intake air system on Bank 2
Symptoms of P1117 BMW
- Rough idling
- Hesitation or stumbling during acceleration
- Engine stalling
- Reduced power or performance
- Poor fuel efficiency
How to Fix P1117 BMW
- Begin by diagnosing the specific cause of the low input signal on Bank 2 using a diagnostic scanner and multimeter.
- Inspect the MAF sensor on Bank 2 for dirt, debris, or damage. Clean or replace the sensor as needed.
- Check for any vacuum leaks on Bank 2 and repair or replace any damaged hoses or components.
- Inspect the wiring harness and connectors related to the MAF sensor on Bank 2 for any signs of damage or corrosion. Repair or replace as necessary.
- Verify the air filter on Bank 2 is clean and unclogged. Replace if necessary.
Cost to Fix P1117 BMW
The cost of repairing a P1117 BMW code can vary depending on the specific cause of the issue. In general, replacing a MAF sensor can cost between $100 and $400, depending on the vehicle make and model. Labor costs can range from $80 to $150 per hour, with the total repair bill potentially reaching $200 to $600. It's important to note that these are rough estimates, and actual costs may vary based on various factors. It's recommended to get a detailed quote from a reputable auto repair shop for a more accurate cost estimate.
Need more information about the P1117 BMW code?
Need more information on how to fix the P1117 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1117 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1117 BMW Code
What does OBDII code P1117 mean for a BMW?
Code P1117 indicates a "Mass or Volume Air Flow Circuit Low Input Bank 2," meaning the mass air flow sensor for Bank 2 is detecting an abnormally low voltage signal.
What are the common symptoms of P1117 in a BMW?
Symptoms may include poor engine performance, rough idling, stalling, decreased fuel efficiency, and an illuminated Check Engine Light.
What causes code P1117 to appear on a BMW?
Possible causes include a faulty mass air flow (MAF) sensor, damaged wiring or connectors, intake air leaks, or a clogged air filter.
Can a dirty air filter trigger P1117 on a BMW?
Yes, a clogged or dirty air filter can restrict airflow and cause the MAF sensor to report low input voltage, leading to this code.
How do I diagnose code P1117 on a BMW?
Start by inspecting the MAF sensor, wiring, and connectors for damage. Check the air filter and look for intake leaks. You may also need a multimeter or scan tool to measure the sensor’s voltage output.
Is it safe to drive with a P1117 code on a BMW?
Driving with this code may lead to reduced engine performance and fuel efficiency. It’s best to address the issue promptly to prevent further damage.
Can a faulty mass air flow sensor cause P1117?
Yes, a failing or damaged MAF sensor can result in low input voltage readings, triggering the P1117 code.
How do I fix OBDII code P1117 on a BMW?
Repairs may involve cleaning or replacing the MAF sensor, repairing damaged wiring, replacing the air filter, or fixing intake manifold leaks.
How much does it cost to repair code P1117 on a BMW?
Repair costs vary depending on the issue. Replacing a MAF sensor typically costs $150–$400, while fixing wiring or leaks may cost less.
Should I reset the code after fixing the issue?
Yes, after completing repairs, use an OBDII scan tool to clear the code and confirm the issue is resolved.
Discuss the causes and fixes for P1117 BMW OBDII Code
Code P1117 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.