Engine-Codes.com
Engine-Codes – Mercury – P1114 Mercury

P1114 Mercury Code - Intake Air Temperature Sensor 2 Circuit Low

Quick Answer

The P1114 diagnostic trouble code for Mercury vehicles refers to a fault in the Intake Air Temperature Sensor 2 Circuit Low. Common causes include Faulty Intake Air Temperature Sensor 2, Damaged wiring or connectors, Corrosion in the sensor or wiring. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1114 Mercury indicates Intake Air Temperature Sensor 2 Circuit Low.
Common causes
Common causes include Faulty Intake Air Temperature Sensor 2, Damaged wiring or connectors, Corrosion in the sensor or wiring.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1114 Mercury Description

The P1114 diagnostic trouble code for Mercury vehicles refers to a fault in the Intake Air Temperature Sensor 2 Circuit Low. This sensor is responsible for measuring the temperature of the air entering the engine and sending this information to the engine control module (ECM). The ECM uses this data to adjust the air-fuel mixture for optimal combustion and engine performance. When the Intake Air Temperature Sensor 2 Circuit registers a low voltage signal, it indicates that the sensor is not operating within the expected range, which can lead to various issues in the vehicle.

OBDII Code P1114 Mercury - Intake Air Temperature Sensor 2 Circuit Low
P1114 Mercury Code - Intake Air Temperature Sensor 2 Circuit Low

Common Causes of P1114 Mercury

  1. Faulty Intake Air Temperature Sensor 2
  2. Damaged wiring or connectors
  3. Corrosion in the sensor or wiring
  4. Poor electrical connections
  5. ECM software issues

Symptoms of P1114 Mercury

  1. Rough idling or engine misfires
  2. Decreased fuel efficiency
  3. Engine hesitation or stumbling during acceleration
  4. Difficulty starting the engine
  5. Illumination of the check engine light

How to Fix P1114 Mercury

  1. Perform a diagnostic scan to confirm the P1114 code and identify the specific cause of the issue.
  2. Inspect the Intake Air Temperature Sensor 2 and its wiring for any visible damage or corrosion.
  3. Test the sensor using a multimeter to determine if it is functioning within the specified voltage range.
  4. Replace the Intake Air Temperature Sensor 2 if it is found to be faulty.
  5. Clear the diagnostic trouble code and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P1114 Mercury

The cost of repairing a P1114 code related to the Intake Air Temperature Sensor 2 Circuit Low can vary depending on the vehicle make and model, the location of the repair shop, and the extent of the issue. On average, the cost of replacing the sensor and addressing the associated wiring or connector problems can range from $100 to $300, including parts and labor. It is advisable to consult with a trusted mechanic or repair shop to get an accurate estimate based on your specific vehicle and location. Keep in mind that diagnostic time and labor rates can also affect the overall cost of the repair.

What does this mean?

Tech Notes for P1114 Mercury

Before replacing the mass air flow sensor, try replacing the air filter and cleaning the air flow sensor with mass air flow sensor cleaner. Reset code and drive vehicle. If the code comes back, it may be necessary to replaced the mass air flow sensor. Monitor the IAT on a scan tool. Look for sudden changes in the reading when the harness is wiggled or the sensor is tapped.

Need more information about the P1114 Mercury code?

Need more information on how to fix the P1114 Mercury code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1114 Mercury code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1114 Mercury Code

1. What are the common symptoms of OBDII code P1114 on a Mercury related to the Intake Air Temperature Sensor 2 Circuit Low?

- Common symptoms include poor engine performance, reduced fuel efficiency, rough idling, and potential stalling.

2. What usually causes the OBDII code P1114 on a Mercury indicating an issue with the Intake Air Temperature Sensor 2 Circuit Low?

- The usual causes are a faulty intake air temperature sensor, damaged wiring or connectors, or a problem with the sensor circuit.

3. How can I diagnose the OBDII code P1114 on my Mercury for the Intake Air Temperature Sensor 2 Circuit Low issue?

- You can diagnose the issue by inspecting the sensor and its wiring for any visible damage, using a multimeter to test the sensor's resistance, and checking for any loose connections.

4. Is it safe to continue driving my Mercury with the OBDII code P1114 related to the Intake Air Temperature Sensor 2 Circuit Low?

- It is not recommended to drive your vehicle with this code as it can lead to further engine damage and poor performance.

5. Can I reset the OBDII code P1114 on my Mercury indicating an Intake Air Temperature Sensor 2 Circuit Low issue?

- Yes, you can reset the code using an OBDII scanner, but it is important to address the underlying problem to prevent the code from reoccurring.

6. How much does it typically cost to repair the OBDII code P1114 on a Mercury due to the Intake Air Temperature Sensor 2 Circuit Low issue?

- Repair costs can vary depending on the exact cause of the issue, but it can range from $100 to $300 for sensor replacement or wiring repairs.

7. Are there any DIY tips for fixing the OBDII code P1114 related to the Intake Air Temperature Sensor 2 Circuit Low on my Mercury?

- DIY tips include checking and cleaning the sensor connections, inspecting wiring for damage, and replacing the sensor if necessary following a guide or manual.

8. Will the OBDII code P1114 cause my Mercury to fail an emissions test due to the Intake Air Temperature Sensor 2 Circuit Low issue?

- Yes, this code can cause your vehicle to fail an emissions test as it indicates a problem with the intake air temperature sensor circuit.

9. How long does it typically take to repair the OBDII code P1114 on a Mercury caused by the Intake Air Temperature Sensor 2 Circuit Low issue?

- Repair times can vary based on the exact cause and complexity of the repair, but it generally takes around 1-2 hours for a sensor replacement or wiring repair.

10. Can a faulty Intake Air Temperature Sensor 2 Circuit Low affect other systems in my Mercury besides triggering the OBDII code P1114?

- Yes, a faulty sensor can lead to issues with fuel delivery, air-to-fuel ratio, and overall engine performance in addition to triggering the specific OBDII code P1114.

Discuss the causes and fixes for P1114 Mercury OBDII Code

Submit a New Comment

Code P1114 Mercury comments

No comments found for this page.