P1114 1999 Ford F150 Code - Intake Air Temperature Sensor 2 Circuit Low
Quick Answer
The P1114 diagnostic trouble code (DTC) for a 1999 Ford F150 indicates a problem with the Intake Air Temperature Sensor 2 Circuit being too low. Common causes include Faulty Intake Air Temperature Sensor 2, Wiring issues in the sensor circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1114 1999 Ford F150 indicates Intake Air Temperature Sensor 2 Circuit Low.
- Common causes
- Common causes include Faulty Intake Air Temperature Sensor 2, Wiring issues in the sensor circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1114 1999 Ford F150 Description
The P1114 diagnostic trouble code (DTC) for a 1999 Ford F150 indicates a problem with the Intake Air Temperature Sensor 2 Circuit being too low. The Intake Air Temperature (IAT) sensor is a crucial component of the engine management system, as it measures the temperature of the air entering the engine. This information is used by the engine control module (ECM) to adjust fuel delivery and ignition timing for optimal performance and efficiency.
Common Causes of P1114 1999 Ford F150
- Faulty Intake Air Temperature Sensor 2
- Wiring issues in the sensor circuit
- ECM malfunction
- Poor electrical connections
- Environmental factors affecting sensor readings
Symptoms of P1114 1999 Ford F150
- Decreased fuel efficiency
- Rough idling or stalling
- Poor acceleration
- Engine misfires
- Check Engine Light illuminated
How to Fix P1114 1999 Ford F150
- Begin by locating the Intake Air Temperature Sensor 2 on the intake manifold.
- Inspect the sensor and its wiring for any visible damage or corrosion.
- Test the sensor using a multimeter to check for proper resistance values.
- Replace the sensor if it fails the resistance test or shows signs of damage.
- Clear the DTC with a scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1114 1999 Ford F150
The cost of repairing the Intake Air Temperature Sensor 2 Circuit Low issue on a 1999 Ford F150 can vary depending on the specific parts needed and the labor rates in your area. On average, the cost of replacing the sensor and addressing any wiring issues can range from $100 to $300. It's important to factor in diagnostic time and labor rates, which can vary between auto repair shops. It's recommended to obtain quotes from multiple shops to get a more accurate estimate for your specific situation.
Tech Notes for P1114 1999 Ford F150
Need more information about the P1114 1999 Ford F150 code?
Need more information on how to fix the P1114 1999 Ford F150 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1114 1999 Ford F150 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1114 1999 Ford F150 Code
1. What does the OBDII code P1114 mean on a 1999 Ford F150?
P1114 indicates a problem with the Intake Air Temperature (IAT) Sensor 2 circuit, specifically a low voltage signal being detected by the engine control module (ECM).
2. What are the common symptoms of the P1114 code?
Common symptoms include reduced engine performance, rough idling, poor fuel efficiency, and possibly the check engine light being illuminated.
3. What causes the P1114 code on a 1999 Ford F150?
The most common causes are a faulty IAT sensor, damaged wiring or connectors, a short circuit, or issues with the ECM.
4. Where is the Intake Air Temperature Sensor 2 located on a 1999 Ford F150?
The IAT Sensor 2 is typically located near the air intake system, often integrated into the air filter housing or intake manifold.
5. Can I drive my 1999 Ford F150 with the P1114 code?
While the vehicle may still run, it’s not recommended to drive with this code for an extended period as it can cause poor performance and potential engine damage.
6. How do I fix the P1114 code on my 1999 Ford F150?
Start by inspecting the IAT sensor and its wiring for damage. Replace the sensor if faulty, repair any damaged wires, and clear the code to see if it returns.
7. How do I test the Intake Air Temperature Sensor 2?
Use a multimeter to check the sensor's resistance. Compare the readings to the manufacturer’s specifications to determine if the sensor is functioning properly.
8. Can a dirty air intake system trigger the P1114 code?
Yes, a dirty or clogged air intake system can affect the IAT sensor’s readings, leading to the P1114 code.
9. How much does it cost to repair a P1114 code on a 1999 Ford F150?
Repair costs vary, but replacing the IAT sensor typically costs between $50 and $150, plus labor if done by a mechanic.
10. Will clearing the code fix the problem permanently?
No, clearing the code will only remove it temporarily. The underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P1114 1999 Ford F150 OBDII Code
Code P1114 1999 Ford F150 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.