P1112 GMC Code - Intake Air Temperature Sensor Circuit Intermittent Low Voltage
Quick Answer
The P1112 diagnostic trouble code for GMC vehicles refers to the Intake Air Temperature (IAT) Sensor Circuit Intermittent Low Voltage. Common causes include Faulty IAT sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1112 GMC indicates Intake Air Temperature Sensor Circuit Intermittent Low Voltage.
- Common causes
- Common causes include Faulty IAT sensor, Damaged wiring or connectors in the sensor circuit, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1112 GMC Description
The P1112 diagnostic trouble code for GMC vehicles refers to the Intake Air Temperature (IAT) Sensor Circuit Intermittent Low Voltage. This code is triggered when the engine control module (ECM) detects that the intake air temperature sensor is sending a signal with a voltage lower than the specified threshold. The IAT sensor is a crucial component in the engine's air intake system, as it measures the temperature of the air entering the engine. This information is used by the ECM to adjust the air-fuel mixture for optimal combustion and engine performance.
Common Causes of P1112 GMC
- Faulty IAT sensor
- Damaged wiring or connectors in the sensor circuit
- Malfunctioning ECM
- Issues with the air intake system, such as clogs or leaks
Symptoms of P1112 GMC
- Reduced fuel efficiency
- Engine misfires or rough idling
- Decreased engine power
- Stalling or hesitation during acceleration
- Illumination of the check engine light
How to Fix P1112 GMC
- Begin by conducting a visual inspection of the IAT sensor, wiring, and connectors to check for any obvious signs of damage or corrosion.
- Test the IAT sensor using a multimeter to verify if it is sending accurate voltage signals.
- If the sensor is faulty, replace it with a new, OEM-approved sensor.
- Inspect and repair any damaged wiring or connectors in the sensor circuit.
- Clear the diagnostic trouble codes from the ECM and perform a test drive to ensure the issue has been resolved.
Cost to Fix P1112 GMC
The typical repair costs for addressing the P1112 code on a GMC vehicle can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor in your area. It's important to consider that diagnosis time and labor rates at auto repair shops can vary, so it's recommended to obtain a detailed estimate from a qualified mechanic or dealership before proceeding with the repair.
Need more information about the P1112 GMC code?
Need more information on how to fix the P1112 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1112 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1112 GMC Code
What does the OBDII code P1112 mean on a GMC vehicle?
Code P1112 indicates an "Intake Air Temperature (IAT) Sensor Circuit Intermittent Low Voltage," meaning the IAT sensor is sending an unstable or abnormally low voltage signal to the engine control module (ECM).
What are the symptoms of code P1112 on a GMC?
Common symptoms include poor engine performance, reduced fuel efficiency, hesitation during acceleration, rough idling, and possibly the illumination of the check engine light.
What causes the P1112 code to appear?
Potential causes include a faulty IAT sensor, damaged or corroded wiring, loose electrical connections, or a malfunctioning ECM.
Can a dirty air filter cause the P1112 code?
While a dirty air filter can affect airflow, it is unlikely to directly cause the P1112 code. However, it’s always good to check and replace the air filter as part of routine maintenance.
How do you diagnose the P1112 code?
Diagnosis typically involves using an OBDII scanner, inspecting the IAT sensor and its wiring for damage, testing the sensor's voltage signal with a multimeter, and checking for loose or corroded connections.
Can I drive with the P1112 code active?
Driving with this code is possible but not recommended, as it may lead to poor engine performance and reduced fuel efficiency. Prolonged driving without addressing the issue could cause further damage.
How do you fix code P1112 on a GMC?
Repairs may include replacing the faulty IAT sensor, repairing or replacing damaged wiring, cleaning electrical connections, or, in rare cases, replacing the ECM if it’s determined to be the root cause.
How much does it cost to fix the P1112 code?
Repair costs can vary depending on the issue. Replacing an IAT sensor typically costs $50–$150, while wiring repairs or ECM replacement may be more expensive.
Can a bad mass airflow (MAF) sensor trigger the P1112 code?
A malfunctioning MAF sensor generally does not trigger P1112 directly, but related issues with airflow readings could indirectly affect the IAT sensor's performance.
How can I prevent the P1112 code from recurring?
Regularly inspect and maintain the IAT sensor, clean electrical connections, check for wiring damage, and replace the air filter as part of routine vehicle maintenance.
Discuss the causes and fixes for P1112 GMC OBDII Code
Code P1112 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.