P1112 2011 Ford Fusion Code - Intake Air Temperature Sensor Intermittent Condition
Quick Answer
The P1112 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates an intermittent condition with the Intake Air Temperature (IAT) sensor. Common causes include Faulty IAT sensor, Damaged wiring or connectors, Poor sensor placement or mounting. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1112 2011 Ford Fusion indicates Intake Air Temperature Sensor Intermittent Condition.
- Common causes
- Common causes include Faulty IAT sensor, Damaged wiring or connectors, Poor sensor placement or mounting.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1112 2011 Ford Fusion Description
The P1112 diagnostic trouble code (DTC) for a 2011 Ford Fusion indicates an intermittent condition with the Intake Air Temperature (IAT) sensor. The IAT sensor is a crucial component in the engine's air intake system, responsible for measuring the temperature of the incoming air. This information is essential for the Engine Control Module (ECM) to calculate the correct air-fuel mixture for optimal combustion.
Common Causes of P1112 2011 Ford Fusion
- Faulty IAT sensor
- Damaged wiring or connectors
- Poor sensor placement or mounting
- ECM software glitches
- Environmental factors affecting sensor readings (excessive heat or cold)
Symptoms of P1112 2011 Ford Fusion
- Decreased fuel efficiency
- Engine misfires or rough idling
- Loss of power or acceleration
- Check Engine Light illuminated
- Inconsistent engine performance
How to Fix P1112 2011 Ford Fusion
- Begin by conducting a visual inspection of the IAT sensor, wiring, and connectors for any obvious signs of damage or corrosion.
- Use a multimeter to test the IAT sensor's resistance and voltage output to determine if it is functioning within specifications.
- Check for proper sensor placement and mounting to ensure accurate temperature readings.
- If the sensor is faulty, replace it with a new OEM or quality aftermarket sensor.
- Clear the DTC and perform a test drive to verify that the issue has been resolved.
Cost to Fix P1112 2011 Ford Fusion
The typical repair costs for addressing a P1112 code on a 2011 Ford Fusion can vary depending on the exact cause of the issue and the parts needed for repair. In general, replacing the IAT sensor can cost between $50 to $150, while labor costs can range from $80 to $150 per hour. Additional costs may include diagnostic time, wiring repairs, or ECM reprogramming if necessary. It is advisable to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on your specific situation.
Tech Notes for P1112 2011 Ford Fusion
Need more information about the P1112 2011 Ford Fusion code?
Need more information on how to fix the P1112 2011 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1112 2011 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1112 2011 Ford Fusion Code
1. What does the OBDII code P1112 mean on a 2011 Ford Fusion?
P1112 indicates an "Intake Air Temperature Sensor Intermittent Condition," meaning the sensor is sending erratic or inconsistent signals to the engine control module (ECM).
2. What are the symptoms of code P1112 in a 2011 Ford Fusion?
Common symptoms include poor engine performance, rough idling, reduced fuel efficiency, and possibly an illuminated check engine light.
3. What causes the P1112 code to appear on a 2011 Ford Fusion?
The code can be caused by a faulty intake air temperature (IAT) sensor, damaged wiring or connectors, or an electrical issue such as a short or open circuit.
4. Can I drive my 2011 Ford Fusion with the P1112 code?
While the car may still run, driving with this code can lead to reduced performance and fuel efficiency. Prolonged driving without addressing the issue may cause further engine problems.
5. How do I diagnose the P1112 code in a 2011 Ford Fusion?
Start by visually inspecting the IAT sensor and its wiring for damage. Use a multimeter to test the sensor's resistance and ensure it's within the manufacturer’s specifications.
6. How do I fix the P1112 code on a 2011 Ford Fusion?
Repairs may involve replacing the faulty IAT sensor, repairing damaged wiring or connectors, or addressing any electrical issues affecting the sensor circuit.
7. Where is the intake air temperature sensor located on a 2011 Ford Fusion?
The IAT sensor is usually located on the intake manifold or integrated into the mass air flow (MAF) sensor, depending on the engine configuration.
8. How much does it cost to repair the P1112 code on a 2011 Ford Fusion?
The cost can vary. Replacing the IAT sensor typically costs $50–$200, including parts and labor. Wiring repairs may add to the cost if needed.
9. Can a dirty air filter cause the P1112 code on a 2011 Ford Fusion?
While unlikely, a severely clogged air filter can disrupt airflow and potentially contribute to sensor issues. It’s a good idea to check and replace the air filter if dirty.
10. Will clearing the P1112 code fix the problem on a 2011 Ford Fusion?
Clearing the code will only temporarily turn off the check engine light. The underlying issue must be resolved to prevent the code from returning.
Discuss the causes and fixes for P1112 2011 Ford Fusion OBDII Code
Code P1112 2011 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.