P1112 2009 Ford Fusion Code - Intake Air Temperature Sensor Intermittent Condition
Quick Answer
The P1112 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates an intermittent condition with the Intake Air Temperature (IAT) sensor. Common causes include Faulty IAT sensor, Damaged wiring or connectors, Corrosion on sensor terminals. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1112 2009 Ford Fusion indicates Intake Air Temperature Sensor Intermittent Condition.
- Common causes
- Common causes include Faulty IAT sensor, Damaged wiring or connectors, Corrosion on sensor terminals.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1112 2009 Ford Fusion Description
The P1112 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates an intermittent condition with the Intake Air Temperature (IAT) sensor. The IAT sensor is a crucial component of the vehicle's engine management system, as it measures the temperature of the air entering the engine. This information is used by the engine control module (ECM) to adjust the air-fuel mixture for optimal combustion. An intermittent condition with the IAT sensor means that the sensor is not providing consistent or accurate readings to the ECM, which can lead to performance issues.
Common Causes of P1112 2009 Ford Fusion
- Faulty IAT sensor
- Damaged wiring or connectors
- Corrosion on sensor terminals
- ECM software issue
- Environmental factors affecting sensor performance (e.g., heat exposure)
Symptoms of P1112 2009 Ford Fusion
- Decreased fuel efficiency
- Rough idling or stalling
- Hesitation during acceleration
- Check Engine Light illuminated
- Increased emissions
How to Fix P1112 2009 Ford Fusion
- Begin by locating the IAT sensor in the intake air duct or air cleaner assembly.
- Inspect the sensor and its wiring for any visible damage or corrosion.
- Test the sensor using a multimeter to check for proper resistance values.
- Replace the IAT sensor if it is found to be faulty.
- Clear the DTC and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1112 2009 Ford Fusion
The cost of repairing an intermittent condition with the IAT sensor on a 2009 Ford Fusion can vary depending on the specific cause of the issue. In general, the cost of a new IAT sensor ranges from $20 to $50, while labor costs for diagnosis and replacement can range from $80 to $150 per hour. Therefore, the total repair cost could be anywhere from $100 to $300 or more, depending on the extent of the repair needed. It is recommended to consult with a qualified mechanic or auto repair shop for a more accurate estimate based on your location and vehicle specifics.
Tech Notes for P1112 2009 Ford Fusion
Need more information about the P1112 2009 Ford Fusion code?
Need more information on how to fix the P1112 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1112 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1112 2009 Ford Fusion Code
1. What does the OBDII code P1112 mean on a 2009 Ford Fusion?
P1112 indicates an intermittent condition with the Intake Air Temperature (IAT) sensor, meaning the sensor's signal is not consistently reaching the engine control module (ECM).
2. What are the symptoms of code P1112 on a 2009 Ford Fusion?
Symptoms may include poor fuel economy, rough idling, reduced engine performance, difficulty starting, or the Check Engine Light turning on.
3. What causes the P1112 code to appear?
Common causes include a faulty IAT sensor, damaged wiring or connectors, corrosion on electrical components, or issues with the ECM.
4. Can I drive my 2009 Ford Fusion with a P1112 code?
While the car may still be drivable, ignoring the issue can lead to poor fuel efficiency and potential engine performance problems. It’s best to address the issue promptly.
5. How can I diagnose a P1112 code?
Start by visually inspecting the IAT sensor and its wiring for damage or corrosion. Use a multimeter to check the sensor's resistance and ensure proper voltage at the connector.
6. How do I fix the P1112 code on a Ford Fusion?
Repairs may involve replacing the faulty IAT sensor, repairing or replacing damaged wiring, cleaning corroded connections, or updating/replacing the ECM if necessary.
7. Where is the Intake Air Temperature (IAT) sensor located on a 2009 Ford Fusion?
The IAT sensor is typically located on the intake manifold or integrated into the Mass Air Flow (MAF) sensor, depending on the engine configuration.
8. How much does it cost to fix a P1112 code on a 2009 Ford Fusion?
The repair cost can range from $50 to $200, depending on whether you need to replace the IAT sensor, repair wiring, or address other related issues.
9. What tools are needed to fix a P1112 code?
You may need a multimeter, OBDII scanner, basic hand tools, and possibly electrical cleaner for cleaning connections.
10. Can a dirty air filter cause a P1112 code?
While unlikely, a severely clogged air filter can indirectly affect the IAT sensor reading. Always check and replace the air filter if it’s dirty.
Discuss the causes and fixes for P1112 2009 Ford Fusion OBDII Code
Code P1112 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.