P1111 NISSAN - Intake Valve Timing Control Solenoid Valve Circuit Bank 1
P1111 NISSAN Possible Causes
- Faulty Intake Valve Timing Control Solenoid Valve Bank 1
- Intake Valve Timing Control Solenoid Valve Bank 1 harness is open or shorted
- Intake Valve Timing Control Solenoid Valve Bank 1 circuit poor electrical connection
How do I fix code P1111 NISSAN
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
P1111 NISSAN Tech NotesSince the Intake valve timing control solenoid valve uses oil flow to control timing, dirty oil can cause the valve to stuck open or close. Before replacing the valve, change engine oil and filter and reset engine code.
Cost of diagnosing the P1111 NISSAN code
Labor: 1.0The cost of diagnosing the P1111 NISSAN code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
When is the P1111 NISSAN code detected?An improper voltage is sent to the ECM through intake valve timing control solenoid valve.
P1111 NISSAN Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Possible engine lack/loss of power
- Possible engine rough idle
P1111 NISSAN MeaningIntake valve timing control solenoid valve is activated by ON/OFF pulse duty (ratio) signals from the ECM. The intake valve timing control solenoid valve changes the oil amount and direction of flow through intake valve timing control unit or stops oil flow.
The longer pulse width advances valve angle. The shorter pulse width retards valve angle.
When ON and OFF pulse widths become equal, the solenoid valve stops oil pressure flow to fix the intake valve angle at the control position.
P1111 NISSAN More InformationNeed more information on how to fix the P1111 NISSAN code?
Get Access to Factory Service Manuals