Engine-Codes - Honda - P1111 HONDA

P1111 HONDA - Intake Air Temperature Sensor Circuit Intermittent High Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What is this?
Table of contents

P1111 HONDA Possible Causes

  • Faulty Intake Air Temperature Sensor
  • Intake Air Temperature Sensor harness is open or shorted
  • Intake Air Temperature Sensor circuit poor electrical connection

How is the P1111 HONDA code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

What is the cost to diagnose the P1111 HONDA code

Labor: 1.0

The cost to diagnose the P1111 HONDA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the code detected?

The P1111 code is set when the Powertrain Control Module (PCM) senses a signal voltage higher than the normal operating range of the sensor.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1111 HONDA Meaning

The Intake Air Temperature (IAT) sensor contains a semiconductor device which changes resistance based on temperature (a thermistor). The IAT sensor mounts in the air intake passage of the engine air induction system. The IAT sensor has a signal circuit and a ground circuit. The Powertrain Control Module (PCM) applies a voltage (about 5.0 volts) on the signal circuit to the sensor. The PCM monitors changes in this voltage caused by changes in the resistance of the sensor in order to determine the intake air temperature.
When the intake air is cold, the sensor (thermistor) resistance is high, and the PCMs signal voltage is only pulled down a small amount through the sensor to ground. The PCM senses a high signal voltage (low temperature). When the intake air is warm, the sensor resistance is low, and the signal voltage is pulled down a greater amount. This causes the PCM to sense a low signal voltage (high temperature).

More Information

Need more information on how to fix the P1111 HONDA code?
Get Access to Factory Service Manuals

Need more help?

Get the P1111 Honda code diagnosed by a professional: Find a repair shop in your area