Engine-Codes - Mercury - P1105 MERCURY

P1105 MERCURY Code - Manifold Absolute Pressure Sensor Circuit Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3
Table of contents

|P1105 MERCURY code possible causes

  • Faulty Manifold Absolute Pressure (MAP) sensor
  • Manifold Absolute Pressure (MAP) sensor harness is open or shorted
  • Manifold Absolute Pressure (MAP) sensor circuit poor electrical connection

|How is the P1105 MERCURY code repair?

Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|What is the cost to diagnose the P1105 MERCURY code

Labor: 1.0

The cost to diagnose the P1105 MERCURY code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are P1105 MERCURY code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|What is P1105 MERCURY code meaning?

The Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine's Engine Control Module (ECM). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.The MAP/BARO Switch solenoid valve switches it's air flow passage according to the voltage signal sent from the ECM.

|Need more information with the P1105 MERCURY code?

Need more information on how to fix the P1105 MERCURY code?
Get Access to Factory Service Manuals

|Need help with a P1105 MERCURY code?

Get the P1105 Mercury code diagnosed by a professional: Find a repair shop in your area