P1105 FORD - Manifold Absolute Pressure Sensor Circuit Malfunction

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P1105 FORD Possible Causes

  • Faulty Manifold Absolute Pressure (MAP) sensor
  • Manifold Absolute Pressure (MAP) sensor harness is open or shorted
  • Manifold Absolute Pressure (MAP) sensor circuit poor electrical connection

First diagnose P1105 FORD code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

Cost of diagnosing the P1105 FORD code

    Labor: 1.0

    The cost of diagnosing the P1105 FORD code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

P1105 FORD Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1105 FORD Meaning

The Manifold Absolute Pressure (MAP) sensor provides instantaneous manifold pressure information to the engine's Engine Control Module (ECM). The data is used to calculate air density and determine the engine's air mass flow rate, which in turn determines the required fuel metering for optimum combustion. A fuel-injected engine may alternately use a Mass Air Flow (MAF) sensor to detect the intake airflow. A typical configuration employs one or the other, but seldom both.The MAP/BARO Switch solenoid valve switches it's air flow passage according to the voltage signal sent from the ECM.
OBDII Code P1105 FORD - Manifold Absolute Pressure Sensor Circuit Malfunction - Engine-Codes.com

P1105 FORD More Information

Need more information on how to fix the P1105 FORD code?
Get Access to Factory Service Manuals

Related Information