Engine-Codes.com
Engine-Codes – Infiniti – P1105 1996 Infiniti I30

P1105 1996 Infiniti I30 Code - Manifold Absolute Pressure/Barometric Pressure Switch Solenoid Valve

Quick Answer

The P1105 diagnostic trouble code (DTC) in a 1996 Infiniti I30 refers to a potential issue with the Manifold Absolute Pressure (MAP) or Barometric Pressure (BARO) switch solenoid valve. Common causes include Faulty MAP/BARO Switch Solenoid Valve: The switch solenoid valve itself may be defective, causing the pressure readings to be inaccurate, Wiring Issues: Corroded or damaged wiring can disrupt the electrical connection between the sensor and the ECM, Vacuum Leak: A vacuum leak in the intake system can affect pressure readings and trigger the code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1105 1996 Infiniti I30 indicates Manifold Absolute Pressure/Barometric Pressure Switch Solenoid Valve.
Common causes
Common causes include Faulty MAP/BARO Switch Solenoid Valve: The switch solenoid valve itself may be defective, causing the pressure readings to be inaccurate, Wiring Issues: Corroded or damaged wiring can disrupt the electrical connection between the sensor and the ECM, Vacuum Leak: A vacuum leak in the intake system can affect pressure readings and trigger the code.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 09, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1105 1996 Infiniti I30 Description

The P1105 diagnostic trouble code (DTC) in a 1996 Infiniti I30 refers to a potential issue with the Manifold Absolute Pressure (MAP) or Barometric Pressure (BARO) switch solenoid valve. This code indicates that there is a problem with the electrical circuit or operation of the switch solenoid valve, which is responsible for regulating the pressure in the intake manifold.

OBDII Code P1105 1996 Infiniti I30 - Manifold Absolute Pressure/Barometric Pressure Switch Solenoid Valve
P1105 1996 Infiniti I30 Code - Manifold Absolute Pressure/Barometric Pressure Switch Solenoid Valve

Common Causes of P1105 1996 Infiniti I30

  1. Faulty MAP/BARO Switch Solenoid Valve: The switch solenoid valve itself may be defective, causing the pressure readings to be inaccurate.
  2. Wiring Issues: Corroded or damaged wiring can disrupt the electrical connection between the sensor and the ECM.
  3. Vacuum Leak: A vacuum leak in the intake system can affect pressure readings and trigger the code.
  4. ECM Malfunction: A malfunctioning ECM may not be processing the sensor data correctly, leading to the code.

Symptoms of P1105 1996 Infiniti I30

  1. Check Engine Light: The most common symptom of a P1105 code is the illumination of the Check Engine Light on the dashboard.
  2. Poor Fuel Economy: Due to the incorrect air-fuel mixture, the vehicle may experience reduced fuel efficiency.
  3. Rough Idling: The engine may idle roughly or inconsistently due to improper pressure regulation.
  4. Hesitation or Stalling: The vehicle may hesitate during acceleration or even stall unexpectedly.

How to Fix P1105 1996 Infiniti I30

  1. Diagnose the Issue: Use a diagnostic tool to retrieve the trouble code and test the MAP/BARO switch solenoid valve for proper operation.
  2. Check Wiring: Inspect the wiring harness for any damage or corrosion and repair or replace as needed.
  3. Test Vacuum Lines: Check the vacuum lines for leaks and repair or replace any damaged hoses.
  4. Replace Switch Solenoid Valve: If the valve is faulty, replace it with a new one following the manufacturer's instructions.
  5. Clear Codes: After completing the repair, clear the DTC and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P1105 1996 Infiniti I30

The typical repair costs for addressing a P1105 code in a 1996 Infiniti I30 can vary depending on the specific cause of the issue and the cost of parts and labor. On average, the cost of replacing a faulty MAP/BARO switch solenoid valve can range from $150 to $300, while diagnosing and repairing wiring issues or vacuum leaks may add to the total cost. Labor rates at auto repair shops can vary between $80 and $150 per hour, so it's advisable to check with local shops for a more accurate estimate.

When is the Code Detected?

An excessively low or high voltage from the sensor is sent to Engine Control Module (ECM).

Need more information about the P1105 1996 Infiniti I30 code?

Need more information on how to fix the P1105 1996 Infiniti I30 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1105 1996 Infiniti I30 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1105 1996 Infiniti I30 Code

1. What are the common symptoms of OBDII code P1105 in a 1996 Infiniti I30?

The common symptoms include poor engine performance, decreased fuel efficiency, and possible stalling or rough idling.

2. What does the OBDII code P1105 in a 1996 Infiniti I30 indicate?

OBDII code P1105 indicates an issue with the Manifold Absolute Pressure/Barometric Pressure Switch Solenoid Valve.

3. What are the possible causes of OBDII code P1105 in a 1996 Infiniti I30?

Possible causes include a faulty solenoid valve, wiring issues, vacuum leaks, or a problem with the engine control module (ECM).

4. How can I diagnose the cause of OBDII code P1105 in my 1996 Infiniti I30?

A thorough inspection of the solenoid valve, checking for vacuum leaks, testing the wiring and connections, and using a scan tool to monitor sensor data can help diagnose the issue.

5. Can I still drive my 1996 Infiniti I30 with OBDII code P1105?

It is not recommended to drive the vehicle extensively with this code present, as it can lead to further damage and poor engine performance.

6. How can I repair OBDII code P1105 in my 1996 Infiniti I30?

Repair options include replacing the faulty solenoid valve, repairing any wiring issues, fixing vacuum leaks, or reprogramming the ECM if necessary.

7. Is it safe to ignore OBDII code P1105 in a 1996 Infiniti I30?

Ignoring the code can lead to potential engine damage and decreased performance, so it is best to address the issue promptly.

8. How much does it cost to fix OBDII code P1105 in a 1996 Infiniti I30?

The cost of repairs can vary depending on the exact cause of the issue, but it is recommended to consult a professional mechanic for an accurate estimate.

9. Can a DIY enthusiast fix OBDII code P1105 in a 1996 Infiniti I30?

Depending on the mechanical skills and tools available, some DIY enthusiasts may be able to address the issue themselves, but it is always recommended to seek professional help for complex repairs.

10. Will resetting the OBDII code P1105 in my 1996 Infiniti I30 make it go away permanently?

Resetting the code without addressing the underlying issue will only temporarily clear the code, and it is likely to reappear until the root cause is fixed.

Discuss the causes and fixes for P1105 1996 Infiniti I30 OBDII Code

Submit a New Comment

Code P1105 1996 Infiniti I30 comments

No comments found for this page.