P1103 Chevrolet Code - Water In Fuel Signal Message Counter Incorrect
Quick Answer
The P1103 code for Chevrolet vehicles indicates that there is an issue with the Water In Fuel Signal Message Counter being incorrect. Common causes include Contaminated fuel with water, Faulty water in fuel sensor, Corrosion in the fuel system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1103 Chevrolet indicates Water In Fuel Signal Message Counter Incorrect.
- Common causes
- Common causes include Contaminated fuel with water, Faulty water in fuel sensor, Corrosion in the fuel system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1103 Chevrolet Description
The P1103 code for Chevrolet vehicles indicates that there is an issue with the Water In Fuel Signal Message Counter being incorrect. This means that the vehicle's onboard computer has detected that the signal related to water in the fuel system is not matching the expected parameters. Water in the fuel system can cause serious damage to the engine and other components if not addressed promptly.
Common Causes of P1103 Chevrolet
- Contaminated fuel with water
- Faulty water in fuel sensor
- Corrosion in the fuel system
- Wiring issues related to the water in fuel sensor
- Issues with the vehicle's onboard computer
Symptoms of P1103 Chevrolet
- Check engine light illuminates
- Rough idling or hesitation during acceleration
- Reduced fuel efficiency
- Engine misfires
- Difficulty starting the vehicle
How to Fix P1103 Chevrolet
- Drain and replace the fuel: The first step is to drain the fuel tank completely and replace it with fresh, clean fuel to remove any water contamination.
- Replace water in fuel sensor: If the sensor is faulty, it will need to be replaced to ensure accurate readings of water content in the fuel system.
- Inspect and clean fuel system components: Check for any signs of corrosion or damage in the fuel system components and clean or replace them as needed.
- Check wiring and connections: Inspect the wiring and connections related to the water in fuel sensor to ensure they are secure and not damaged.
- Clear error codes: After completing the repairs, clear the error codes stored in the vehicle's computer to reset the check engine light.
Cost to Fix P1103 Chevrolet
The cost of repairing a P1103 code can vary depending on the specific cause of the issue and the extent of the damage. In general, the cost of replacing a water in fuel sensor can range from $100 to $300, while draining and replacing the fuel can cost around $150 to $400. Additional costs may be incurred for cleaning or replacing fuel system components. Overall, the total repair cost for a P1103 code can range from $200 to $800 or more, including parts and labor. It's recommended to consult a professional mechanic for an accurate diagnosis and cost estimate based on the specific vehicle and circumstances.
Need more information about the P1103 Chevrolet code?
Need more information on how to fix the P1103 Chevrolet code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1103 Chevrolet code diagnosed by a professional: Find a repair shop in your area
Information for Specific Chevrolet Models
- P1103 2014 Chevrolet Silverado — Water In Fuel Signal Message Counter Incorrect
- P1103 2015 Chevrolet Silverado — Water In Fuel Signal Message Counter Incorrect
- P1103 2016 Chevrolet Silverado — Water In Fuel Signal Message Counter Incorrect
- P1103 2017 Chevrolet Silverado — Water In Fuel Signal Message Counter Incorrect
- P1103 2018 Chevrolet Silverado — Water In Fuel Signal Message Counter Incorrect
Frequently Asked Questions about P1103 Chevrolet Code
1. What are the common symptoms of OBDII code P1103 in a Chevrolet related to the "Water In Fuel Signal Message Counter Incorrect"?
- Common symptoms include poor engine performance, rough idling, stalling, difficulty starting the vehicle, and the illumination of the Check Engine Light.
2. What are the possible causes of OBDII code P1103 in a Chevrolet indicating the "Water In Fuel Signal Message Counter Incorrect"?
- Possible causes may include a faulty water in fuel sensor, damaged wiring or connectors in the water in fuel circuit, or a malfunctioning engine control module (ECM).
3. How can I diagnose OBDII code P1103 in a Chevrolet if I suspect the "Water In Fuel Signal Message Counter Incorrect" issue?
- Diagnosis typically involves inspecting the water in fuel sensor, checking the wiring and connectors for any damage, and using a diagnostic scanner to read the codes stored in the ECM.
4. What are some recommended repair tips for addressing OBDII code P1103 in a Chevrolet related to the "Water In Fuel Signal Message Counter Incorrect"?
- Repair tips may include replacing the water in fuel sensor if found faulty, repairing any damaged wiring or connectors, and resetting the ECM after completing the repairs.
5. Can I continue driving my Chevrolet with OBDII code P1103 indicating the "Water In Fuel Signal Message Counter Incorrect" without causing further damage?
- It is not recommended to continue driving the vehicle with this code present, as it may lead to more serious issues and potential engine damage if left unaddressed.
6. How much does it typically cost to repair OBDII code P1103 in a Chevrolet due to the "Water In Fuel Signal Message Counter Incorrect" problem?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.
7. Is it possible to reset OBDII code P1103 in a Chevrolet related to the "Water In Fuel Signal Message Counter Incorrect" without repairing the issue?
- While you can clear the code with a diagnostic scanner, it is important to address the underlying problem to prevent it from recurring and potentially causing more serious issues.
8. Are there any preventive maintenance measures I can take to avoid encountering OBDII code P1103 in a Chevrolet indicating the "Water In Fuel Signal Message Counter Incorrect"?
- Regularly checking and replacing the fuel filter, using high-quality fuel, and keeping up with scheduled maintenance can help prevent issues related to water in fuel contamination.
9. Can a DIY enthusiast with basic automotive knowledge repair OBDII code P1103 in a Chevrolet caused by the "Water In Fuel Signal Message Counter Incorrect"?
- Depending on the exact cause, some DIY enthusiasts may be able to address the issue by following repair guides and using the necessary tools. However, more complex issues may require professional assistance.
10. How long does it typically take to repair OBDII code P1103 in a Chevrolet related to the "Water In Fuel Signal Message Counter Incorrect"?
- The repair time can vary based on the specific cause and the extent of the repairs needed, but it may take anywhere from 1 to 3 hours to complete the repair process.
Discuss the causes and fixes for P1103 Chevrolet OBDII Code
Code P1103 Chevrolet comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.