P1103 2014 GMC Sierra Code - Water In Fuel Signal Message Counter Incorrect
Quick Answer
The P1103 diagnostic trouble code for a 2014 GMC Sierra indicates that the Water In Fuel Signal Message Counter is incorrect. Common causes include Faulty water in fuel sensor, Corroded or damaged wiring in the fuel system, Malfunctioning engine control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1103 2014 GMC Sierra indicates Water In Fuel Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty water in fuel sensor, Corroded or damaged wiring in the fuel system, Malfunctioning engine control module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1103 2014 GMC Sierra Description
The P1103 diagnostic trouble code for a 2014 GMC Sierra indicates that the Water In Fuel Signal Message Counter is incorrect. This means that the vehicle's onboard computer has detected an issue with the signal related to water in the fuel system. Water in the fuel can cause corrosion, damage to fuel system components, and lead to poor engine performance. The incorrect signal message counter suggests that there may be a malfunction in the sensor or circuit responsible for detecting water in the fuel.
Common Causes of P1103 2014 GMC Sierra
- Faulty water in fuel sensor
- Corroded or damaged wiring in the fuel system
- Malfunctioning engine control module
- Contaminated fuel with water
- Poor quality fuel filter
Symptoms of P1103 2014 GMC Sierra
- Rough idling or stalling
- Reduced engine performance
- Check engine light illuminated
- Fuel efficiency decreases
- Engine misfires
How to Fix P1103 2014 GMC Sierra
- Inspect the water in fuel sensor and wiring for any damage or corrosion.
- Test the sensor's functionality using a multimeter to ensure it is sending the correct signal.
- Check the fuel system for any signs of water contamination and drain if necessary.
- Replace the water in fuel sensor if it is found to be faulty.
- Clear the trouble code from the ECM and test drive the vehicle to ensure the issue is resolved.
Cost to Fix P1103 2014 GMC Sierra
The typical repair costs for resolving a P1103 code in a 2014 GMC Sierra can range from $100 to $300, depending on the specific cause of the issue. This estimate includes the cost of parts such as a new water in fuel sensor and any necessary labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's recommended to check with local shops for a more accurate estimate.
Need more information about the P1103 2014 GMC Sierra code?
Need more information on how to fix the P1103 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1103 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1103 2014 GMC Sierra Code
1. What does the OBDII code P1103 mean on a 2014 GMC Sierra?
The P1103 code indicates an issue with the Water In Fuel (WIF) sensor, specifically that the signal message counter is incorrect or outside the expected range.
2. What are common symptoms of the P1103 code in a 2014 GMC Sierra?
Symptoms may include a "Water in Fuel" warning message on the dashboard, decreased engine performance, rough idling, or hesitation during acceleration.
3. What causes the P1103 code in a GMC Sierra?
This code can be triggered by a malfunctioning Water In Fuel sensor, contaminated fuel, damaged wiring or connections, or a faulty ECM (Engine Control Module) misinterpreting the signal.
4. Can driving with the P1103 code damage my 2014 GMC Sierra?
Driving with this code may lead to engine damage if water contamination is severe, as water in the fuel can harm injectors or other fuel system components.
5. How do I diagnose the P1103 code in my truck?
Start by inspecting the Water In Fuel sensor, checking for contamination in the fuel, and examining the wiring and connectors for damage or corrosion.
6. How do I fix the P1103 code on a 2014 GMC Sierra?
Repairs may involve draining and replacing contaminated fuel, cleaning or replacing the Water In Fuel sensor, repairing damaged wiring, or reprogramming the ECM if necessary.
7. Can a bad fuel filter cause the P1103 code?
While a clogged fuel filter itself doesn’t directly cause this code, it could contribute to water contamination or poor fuel quality, which might trigger the P1103 code.
8. How can I prevent the P1103 code from recurring?
Use high-quality fuel, regularly maintain the fuel system, replace the fuel filter as recommended, and promptly address any water contamination issues.
9. Is the P1103 code specific to diesel engines in the GMC Sierra?
Yes, this code is typically associated with diesel engines, as they are equipped with a Water In Fuel detection system.
10. Do I need special tools to fix the P1103 code on my GMC Sierra?
You may need an OBDII scanner to confirm the code, basic tools to check wiring and connectors, and possibly specialized equipment to replace the Water In Fuel sensor or drain the fuel system.
Discuss the causes and fixes for P1103 2014 GMC Sierra OBDII Code
Code P1103 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.