P10E2 2018 GMC Sierra Code - Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage
Quick Answer
The P10E2 diagnostic trouble code for a 2018 GMC Sierra indicates a problem with the Ignition On/Start Circuit Source Bypass Relay Control Circuit having low voltage. Common causes include Faulty relay control module, Low battery voltage, Wiring or connection issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10E2 2018 GMC Sierra indicates Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty relay control module, Low battery voltage, Wiring or connection issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P10E2 2018 GMC Sierra Description
The P10E2 diagnostic trouble code for a 2018 GMC Sierra indicates a problem with the Ignition On/Start Circuit Source Bypass Relay Control Circuit having low voltage. This code points to an issue with the relay control circuit that is responsible for bypassing the ignition and starting system. The low voltage in this circuit can prevent the relay from functioning properly, which can lead to difficulties in starting the vehicle or even cause it to stall while driving. This can result in significant performance issues and potential safety concerns if not addressed promptly.
Common Causes of P10E2 2018 GMC Sierra
- Faulty relay control module
- Low battery voltage
- Wiring or connection issues
- Corrosion or damage to electrical components
- Faulty ignition switch
Symptoms of P10E2 2018 GMC Sierra
- Difficulty starting the vehicle
- Engine stalling while driving
- Illumination of the Check Engine Light
- Reduced engine performance
- Loss of power to various electrical components
How to Fix P10E2 2018 GMC Sierra
- Perform a thorough inspection of the relay control circuit to identify any loose connections or damaged wiring.
- Test the battery voltage to ensure it is within the recommended range.
- Check the relay control module for proper functioning and replace if necessary.
- Inspect the ignition switch for any signs of wear or malfunction and replace if needed.
- Clear the diagnostic trouble codes and test the vehicle to ensure the issue has been resolved.
Cost to Fix P10E2 2018 GMC Sierra
The cost of repairing a P10E2 code on a 2018 GMC Sierra can vary depending on the specific cause of the issue. On average, the repair costs for this type of problem could range from $150 to $500, including parts and labor. However, it is important to keep in mind that labor rates and diagnostic time can vary between auto repair shops. It is recommended to contact local shops for more accurate pricing information.
Need more information about the P10E2 2018 GMC Sierra code?
Need more information on how to fix the P10E2 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10E2 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10E2 2018 GMC Sierra Code
What does the OBDII code P10E2 mean on a 2018 GMC Sierra?
The P10E2 code indicates a problem with the Ignition On/Start Circuit Source Bypass Relay Control Circuit, specifically detecting low voltage.
What are the common symptoms of a P10E2 code?
Symptoms may include difficulty starting the engine, intermittent starting issues, or no response when turning the key or pressing the start button.
What causes the P10E2 code to appear?
Potential causes include a faulty bypass relay, damaged wiring or connectors in the circuit, a weak battery, or an issue with the powertrain control module (PCM).
How is the P10E2 code diagnosed?
A technician will check the battery voltage, inspect the wiring and connectors for damage, test the bypass relay for functionality, and use a scan tool to monitor circuit voltage.
Can a weak battery trigger the P10E2 code?
Yes, a weak or failing battery can result in low voltage to the bypass relay control circuit and trigger the P10E2 code.
How can I fix the P10E2 code on my 2018 GMC Sierra?
Repairs may involve replacing the bypass relay, repairing damaged wiring, cleaning or tightening connections, or replacing the battery if it’s weak or failing.
Is the P10E2 code serious?
Yes, this code can prevent the vehicle from starting, making it important to resolve the issue promptly to avoid being stranded.
Can I drive my GMC Sierra with the P10E2 code active?
Driving may be possible if the vehicle starts, but the issue could worsen and lead to a complete failure to start. It’s best to address the problem as soon as possible.
Does the P10E2 code require replacing the PCM?
Not always. While a PCM issue is possible, it’s more commonly caused by a relay, wiring, or battery problem. The PCM should only be replaced after confirming it’s faulty.
How much does it cost to fix the P10E2 code?
Repair costs can vary, but typical expenses may include $50–$200 for a bypass relay, $100–$300 for wiring repairs, and $100–$250 for a new battery, plus labor fees.
Discuss the causes and fixes for P10E2 2018 GMC Sierra OBDII Code
Code P10E2 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.