P10E2 2016 GMC Sierra Code - Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage
Quick Answer
The P10E2 diagnostic trouble code (DTC) indicates a problem within the ignition on/start circuit, specifically related to the Source Bypass Relay Control Circuit, which is registering low voltage. Common causes include Faulty bypass relay that fails to close or open properly, Corroded or damaged wiring in the ignition circuit, Issues with the vehicle's ECM, preventing it from sending the correct voltage to the relay. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10E2 2016 GMC Sierra indicates Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage.
- Common causes
- Common causes include Faulty bypass relay that fails to close or open properly, Corroded or damaged wiring in the ignition circuit, Issues with the vehicle's ECM, preventing it from sending the correct voltage to the relay.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P10E2 2016 GMC Sierra Description
The P10E2 diagnostic trouble code (DTC) indicates a problem within the ignition on/start circuit, specifically related to the Source Bypass Relay Control Circuit, which is registering low voltage. This relay is crucial for the proper functioning of the vehicle's ignition system, as it controls the power supply to various components necessary for starting the engine. When the voltage is low, it can lead to insufficient power being delivered to the ignition system, resulting in difficulty starting the vehicle or intermittent starting issues.
Common Causes of P10E2 2016 GMC Sierra
- Faulty bypass relay that fails to close or open properly.
- Corroded or damaged wiring in the ignition circuit.
- Issues with the vehicle's ECM, preventing it from sending the correct voltage to the relay.
- Poor ground connections that can lead to voltage drops in the circuit.
- Battery issues, such as low voltage or a failing battery, affecting the overall electrical system.
Symptoms of P10E2 2016 GMC Sierra
- Difficulty starting the engine or intermittent starting issues.
- Engine cranks but does not start.
- Dashboard warning lights, particularly those related to the ignition or electrical systems, may illuminate.
- Unresponsive electrical components, such as power windows or radio, when attempting to start the vehicle.
- Occasional stalling or loss of power while driving, indicating potential relay failure.
How to Fix P10E2 2016 GMC Sierra
- Diagnostic Testing: Begin with a thorough diagnostic scan to confirm the P10E2 code and check for any additional codes that may provide further insight into the issue.
- Visual Inspection: Inspect the wiring and connectors associated with the bypass relay for signs of damage, corrosion, or loose connections. Repair or replace any damaged components as necessary.
- Relay Replacement: If the relay is found to be faulty, replace it with a new one. Ensure that the replacement relay is compatible with the vehicle's specifications.
- Check Ground Connections: Verify that all ground connections are secure and free from corrosion. Clean or repair any poor connections to ensure proper voltage delivery.
- ECM Testing: If the issue persists, test the ECM for proper functionality. This may involve checking for software updates or reprogramming the module if necessary.
Cost to Fix P10E2 2016 GMC Sierra
The typical repair costs for addressing the P10E2 code can vary widely based on the specific diagnosis and repairs needed. A rough estimate for parts and labor may range from $150 to $600. This estimate includes the cost of a new relay (approximately $20 to $50) and labor charges, which can vary based on location and shop rates. Most auto repair shops charge between $80 and $150 per hour; however, rates may be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. It's advisable to check local rates for a more precise estimate, as the specific diagnosis time and labor rates can significantly influence the overall cost of repair.
Need more information about the P10E2 2016 GMC Sierra code?
Need more information on how to fix the P10E2 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10E2 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10E2 2016 GMC Sierra Code
1. What are the common symptoms of OBDII code P10E2 in a 2016 GMC Sierra?
- Common symptoms include difficulty starting the vehicle, intermittent stalling, decreased fuel efficiency, and illuminated Check Engine Light.
2. What can cause the Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage code in a 2016 GMC Sierra?
- Possible causes of this code include a faulty bypass relay, damaged wiring or connectors in the circuit, a weak battery, or issues with the ignition switch.
3. How can I diagnose the source of the low voltage issue triggering code P10E2 in my 2016 GMC Sierra?
- Use a multimeter to check the voltage at the relay and related components. Inspect the wiring for any damage or corrosion. Test the bypass relay for proper functionality.
4. Can a DIY enthusiast repair OBDII code P10E2 in a 2016 GMC Sierra?
- While some simple checks like inspecting wiring can be done by DIY enthusiasts, diagnosing and repairing complex electrical issues related to this code may require professional help.
5. Is it safe to continue driving with the Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage code illuminated in my 2016 GMC Sierra?
- It is not recommended to continue driving with this code active, as it can lead to potential starting or stalling issues, affecting the vehicle's performance and safety.
6. What are the potential consequences of ignoring OBDII code P10E2 in a 2016 GMC Sierra?
- Ignoring this code can result in prolonged starting problems, potential stalling while driving, decreased fuel efficiency, and possible damage to other electrical components.
7. How much does it typically cost to repair OBDII code P10E2 in a 2016 GMC Sierra?
- The cost of repair can vary depending on the exact cause of the issue. It may involve replacing the bypass relay, repairing wiring, or addressing other underlying electrical problems, so costs can range from moderate to significant.
8. Can a weak battery be a common trigger for the Ignition On/Start Circuit Source Bypass Relay Control Circuit Low Voltage code in a 2016 GMC Sierra?
- Yes, a weak or failing battery can contribute to low voltage issues in the circuit, triggering this code. It's advisable to have the battery tested as part of the diagnostic process.
9. Are there any preventative maintenance steps to avoid OBDII code P10E2 in a 2016 GMC Sierra?
- Regularly checking the battery's health, ensuring proper electrical connections, and addressing any wiring issues promptly can help prevent the occurrence of this code.
10. Should I reset the Check Engine Light after resolving OBDII code P10E2 in my 2016 GMC Sierra?
- Yes, once the issue triggering the code has been successfully repaired, it is recommended to clear the code and reset the Check Engine Light using an OBDII scanner to ensure the system recognizes the fix.
Discuss the causes and fixes for P10E2 2016 GMC Sierra OBDII Code
Code P10E2 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.