P10C8 2014 Chevrolet Silverado Code - Reductant Temperature Signal Message Counter Incorrect
Quick Answer
The P10C8 diagnostic trouble code (DTC) for the 2014 Chevrolet Silverado indicates that there is an issue with the reductant temperature signal message counter. Common causes include Faulty reductant temperature sensor, Damaged wiring or connectors associated with the temperature sensor, Corrosion or contamination in the sensor or its connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10C8 2014 Chevrolet Silverado indicates Reductant Temperature Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty reductant temperature sensor, Damaged wiring or connectors associated with the temperature sensor, Corrosion or contamination in the sensor or its connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P10C8 2014 Chevrolet Silverado Description
The P10C8 diagnostic trouble code (DTC) for the 2014 Chevrolet Silverado indicates that there is an issue with the reductant temperature signal message counter. This code is part of the vehicle's emissions control system, specifically related to the selective catalytic reduction (SCR) system that uses diesel exhaust fluid (DEF) to reduce nitrogen oxides (NOx) emissions. The reductant temperature sensor monitors the temperature of the DEF as it enters the SCR system. When the Engine Control Module (ECM) detects an inconsistency in the signal from the reductant temperature sensor, it triggers the P10C8 code.
Common Causes of P10C8 2014 Chevrolet Silverado
- Faulty reductant temperature sensor.
- Damaged wiring or connectors associated with the temperature sensor.
- Corrosion or contamination in the sensor or its connections.
- Malfunctioning Engine Control Module (ECM) that misreads the sensor data.
- Issues with the SCR system that affect the temperature readings, such as blockages or leaks.
Symptoms of P10C8 2014 Chevrolet Silverado
- Check Engine Light (CEL) illuminated on the dashboard.
- Reduced engine power or limp mode activated.
- Increased exhaust emissions, potentially leading to failed emissions tests.
- Poor fuel economy due to improper DEF dosing.
- Erratic or fluctuating readings on the temperature gauge for the DEF system.
How to Fix P10C8 2014 Chevrolet Silverado
- Diagnostic Testing: Begin with a thorough diagnostic scan to confirm the P10C8 code and check for any other related codes that may provide additional context.
- Visual Inspection: Inspect the wiring and connectors associated with the reductant temperature sensor for signs of damage, corrosion, or loose connections.
- Sensor Replacement: If the sensor is found to be faulty, replace it with a new, OEM-quality sensor to ensure proper functionality.
- Wiring Repair: If any wiring issues are detected, repair or replace damaged wires and ensure all connections are secure and free from corrosion.
- ECM Reprogramming: After repairs, it may be necessary to reprogram or reset the ECM to clear the code and ensure it correctly interprets the sensor readings.
Cost to Fix P10C8 2014 Chevrolet Silverado
The cost to repair the P10C8 code can vary significantly based on the specific issue identified during diagnosis. On average, the cost for parts and labor can range from $150 to $600. A new reductant temperature sensor typically costs between $50 and $150, while labor costs can range from $80 to $150 per hour. The total repair time may take 1 to 3 hours, depending on the complexity of the issue. It's important to note that labor rates can vary based on location, vehicle make and model, and engine type. In metropolitan areas or at dealerships, rates may be higher, while independent shops often charge less. Therefore, it is advisable to check local rates for a more precise estimate.
Need more information about the P10C8 2014 Chevrolet Silverado code?
Need more information on how to fix the P10C8 2014 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10C8 2014 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10C8 2014 Chevrolet Silverado Code
1. What does the OBDII code P10C8 mean for a 2014 Chevrolet Silverado?
P10C8 indicates an issue with the reductant (DEF) temperature sensor signal, specifically related to an incorrect message counter received by the ECM.
2. What are common symptoms of the P10C8 code?
Symptoms may include the check engine light turning on, reduced engine performance, DEF system warnings, or the vehicle entering a limp mode.
3. What causes the P10C8 code to appear?
Common causes include a faulty reductant temperature sensor, damaged wiring or connectors in the DEF system, or a problem with the ECM communication.
4. How can I diagnose the P10C8 code?
Start by scanning for codes, inspecting the wiring and connectors around the reductant temperature sensor, and testing the sensor’s signal with a multimeter.
5. Can I drive my 2014 Chevrolet Silverado with a P10C8 code?
Driving with this code may lead to reduced performance or limp mode. It’s best to address the issue promptly to avoid further damage.
6. How do I fix the P10C8 code?
Repairs may involve replacing the reductant temperature sensor, repairing or replacing damaged wiring, or reprogramming the ECM if necessary.
7. How much does it cost to fix the P10C8 code?
Repair costs vary but typically range from $100 to $400, depending on whether the sensor, wiring, or ECM requires replacement or repair.
8. Can a bad ECM cause the P10C8 code?
Yes, a malfunctioning ECM may fail to process the reductant temperature signal correctly, triggering the P10C8 code.
9. How can I prevent the P10C8 code from recurring?
Regularly inspect and maintain the DEF system, including sensors, wiring, and connectors, to prevent signal issues.
10. Is the P10C8 code covered under warranty for a 2014 Chevrolet Silverado?
It depends on your warranty terms. DEF system components may be covered under emissions warranties, so check with your dealer.
Discuss the causes and fixes for P10C8 2014 Chevrolet Silverado OBDII Code
Code P10C8 2014 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.