P10C7 2017 GMC Sierra Code - Reductant Control System Signal Message Counter Incorrect
Quick Answer
The P10C7 diagnostic trouble code (DTC) for a 2017 GMC Sierra relates to the Reductant Control System Signal Message Counter being incorrect. Common causes include Faulty DEF level sensor, Wiring issues or corrosion in the SCR system, Malfunctioning DEF injector. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10C7 2017 GMC Sierra indicates Reductant Control System Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty DEF level sensor, Wiring issues or corrosion in the SCR system, Malfunctioning DEF injector.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P10C7 2017 GMC Sierra Description
The P10C7 diagnostic trouble code (DTC) for a 2017 GMC Sierra relates to the Reductant Control System Signal Message Counter being incorrect. This code is typically associated with the vehicle's Selective Catalytic Reduction (SCR) system, which is responsible for reducing harmful emissions by injecting a urea-based solution (DEF - Diesel Exhaust Fluid) into the exhaust stream. The SCR system works in conjunction with the Diesel Particulate Filter (DPF) to meet emission standards set by regulatory bodies.
Common Causes of P10C7 2017 GMC Sierra
- Faulty DEF level sensor.
- Wiring issues or corrosion in the SCR system.
- Malfunctioning DEF injector.
- Software glitches in the ECM.
- Poor quality DEF fluid or contamination.
Symptoms of P10C7 2017 GMC Sierra
- Check Engine Light illuminated on the dashboard.
- Reduced fuel efficiency.
- Increased emissions output.
- Engine running rough or misfiring.
- Vehicle may go into a reduced power mode.
How to Fix P10C7 2017 GMC Sierra
- Use a diagnostic scan tool to retrieve the specific fault codes and data related to the Reductant Control System Signal Message Counter.
- Inspect the DEF system components, including sensors, wiring, and injectors, for any visible damage or corrosion.
- Test the functionality of the DEF system components using a multimeter or oscilloscope to identify any faulty parts.
- Replace any defective components, such as sensors, wiring harnesses, or the DEF injector, as needed.
- Clear the fault codes from the ECM memory and perform a test drive to ensure the issue has been resolved.
Cost to Fix P10C7 2017 GMC Sierra
The typical repair costs for addressing a P10C7 code on a 2017 GMC Sierra can vary depending on the specific cause of the issue. Parts such as sensors, wiring harnesses, or injectors may range from $100 to $500, while labor costs can add another $100 to $300. Overall, the total repair cost could range from $200 to $800. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Need more information about the P10C7 2017 GMC Sierra code?
Need more information on how to fix the P10C7 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10C7 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10C7 2017 GMC Sierra Code
1. What does the OBDII code P10C7 mean on a 2017 GMC Sierra?
P10C7 indicates an issue with the Reductant Control System, where the signal message counter is incorrect, often related to communication errors between the engine control module (ECM) and the reductant control module.
2. What are the common symptoms of the P10C7 code?
Common symptoms include a Check Engine Light, possible DEF (Diesel Exhaust Fluid) system warnings, reduced engine power, or poor emissions performance.
3. What causes the P10C7 code to trigger?
This code can be caused by faulty wiring, damaged connectors, a malfunctioning reductant control module, or corrupted software in the ECM or reductant module.
4. Can I drive my 2017 GMC Sierra with the P10C7 code active?
It is not recommended to drive for an extended period with this code active, as it may lead to reduced engine performance or emissions system issues.
5. How do I diagnose the P10C7 code?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the wiring and connectors for damage, and verifying proper communication between the ECM and reductant control module.
6. How is the P10C7 code fixed?
Repairs may include repairing or replacing damaged wiring or connectors, reprogramming or replacing the reductant control module, or updating ECM software.
7. Does the P10C7 code indicate a serious issue?
While not immediately critical, it can lead to emissions system malfunctions or reduced engine performance if not addressed promptly.
8. What tools are needed to troubleshoot the P10C7 code?
You will need a diagnostic scanner, a multimeter for electrical testing, and potentially service manuals for your 2017 GMC Sierra.
9. Can a software update resolve the P10C7 code?
Yes, in some cases, a software update for the ECM or reductant control module can resolve the issue if it is related to communication errors.
10. What should I do if the P10C7 code keeps returning after repairs?
If the code persists, recheck the wiring, connectors, and modules for issues, and consider consulting a professional technician to ensure no underlying problems are missed.
Discuss the causes and fixes for P10C7 2017 GMC Sierra OBDII Code
Code P10C7 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.