P10C7 2016 GMC Sierra Code - Reductant Control System Signal Message Counter Incorrect
Quick Answer
The P10C7 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a problem with the Reductant Control System Signal Message Counter being incorrect. Common causes include Faulty Reductant Control Module: A malfunctioning control module can cause communication errors within the Reductant Control System, DEF Quality Issues: Contaminated or low-quality DEF can lead to sensor errors and incorrect signal messages, Wiring or Connection Problems: Loose or damaged wiring connections between components can disrupt the communication signals within the system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10C7 2016 GMC Sierra indicates Reductant Control System Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Reductant Control Module: A malfunctioning control module can cause communication errors within the Reductant Control System, DEF Quality Issues: Contaminated or low-quality DEF can lead to sensor errors and incorrect signal messages, Wiring or Connection Problems: Loose or damaged wiring connections between components can disrupt the communication signals within the system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P10C7 2016 GMC Sierra Description
The P10C7 diagnostic trouble code (DTC) for a 2016 GMC Sierra indicates a problem with the Reductant Control System Signal Message Counter being incorrect. The Reductant Control System is part of the vehicle's emissions control system, specifically related to the Selective Catalytic Reduction (SCR) system. This system helps reduce harmful emissions by injecting a urea-based solution (DEF - Diesel Exhaust Fluid) into the exhaust stream to convert nitrogen oxides into harmless nitrogen and water vapor.
Common Causes of P10C7 2016 GMC Sierra
- Faulty Reductant Control Module: A malfunctioning control module can cause communication errors within the Reductant Control System.
- DEF Quality Issues: Contaminated or low-quality DEF can lead to sensor errors and incorrect signal messages.
- Wiring or Connection Problems: Loose or damaged wiring connections between components can disrupt the communication signals within the system.
- Exhaust System Leaks: Leaks in the exhaust system can affect the proper operation of the Reductant Control System by altering the flow of exhaust gases.
- Software or Calibration Issues: Software glitches or calibration errors within the vehicle's onboard computer system can also trigger this code.
Symptoms of P10C7 2016 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the vehicle's dashboard.
- Reduced Power: The vehicle may experience a loss of power or reduced performance due to the incorrect operation of the Reductant Control System.
- Poor Fuel Economy: A malfunctioning Reductant Control System can lead to decreased fuel efficiency as the system may not be operating optimally.
- Increased Emissions: The vehicle may produce higher levels of harmful emissions due to the improper functioning of the emissions control system.
How to Fix P10C7 2016 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to retrieve the specific error codes and pinpoint the exact cause of the problem.
- Inspect Wiring and Connections: Check all wiring and connections related to the Reductant Control System for any signs of damage or corrosion. Repair or replace as needed.
- Test DEF Quality: Verify the quality of the DEF being used in the vehicle to ensure it meets the manufacturer's specifications.
- Replace Reductant Control Module: If the control module is found to be faulty, replace it with a new one to restore proper communication within the system.
- Clear Codes and Test Drive: After completing the repairs, clear the error codes from the vehicle's computer system and take it for a test drive to ensure the issue has been resolved.
Cost to Fix P10C7 2016 GMC Sierra
The typical repair costs for addressing a P10C7 code on a 2016 GMC Sierra can vary depending on the specific cause of the issue. In general, the cost of parts for this repair can range from $200 to $500, with labor costs adding an additional $100 to $200. However, it's important to note that these are rough estimates, and actual costs may vary based on factors such as location, the shop's labor rates, and any additional repairs or parts needed. It's recommended to consult with a qualified mechanic or repair shop for a more accurate cost estimate tailored to your specific situation.
Need more information about the P10C7 2016 GMC Sierra code?
Need more information on how to fix the P10C7 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10C7 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10C7 2016 GMC Sierra Code
What does the P10C7 code mean on a 2016 GMC Sierra?
The P10C7 code indicates an issue with the reductant control system, specifically that the signal message counter is incorrect, suggesting a communication problem between the ECM and the reductant control module.
What are the common symptoms of the P10C7 code in a GMC Sierra?
Symptoms may include the check engine light turning on, reduced engine performance, and potential DEF (Diesel Exhaust Fluid) system warnings on the dashboard.
What causes the P10C7 code to appear?
The most common causes include a malfunctioning reductant control module, wiring or connector issues, software glitches, or a failed ECM.
Can a bad reductant control module trigger the P10C7 code?
Yes, a faulty reductant control module can cause this code if it fails to send proper signal messages to the ECM.
How can you diagnose the P10C7 code?
Diagnosis involves using an OBDII scanner to read the code, inspecting the wiring and connectors for damage or corrosion, and testing the reductant control module and ECM for proper operation.
Can the P10C7 code affect vehicle performance?
Yes, this code can reduce engine performance or limit speed if the DEF system is compromised or not communicating properly.
Is it safe to drive with the P10C7 code active?
While the vehicle may still be operable, driving with this code active could lead to reduced performance and may eventually cause the truck to enter a limp mode.
What repairs are typically required to fix the P10C7 code?
Common repairs include replacing a faulty reductant control module, addressing wiring or connector issues, and performing a software update or reprogramming the ECM.
Can a software update fix the P10C7 code?
Yes, if the issue is related to outdated ECM software or communication errors, a software update may resolve the problem.
How much does it cost to repair the P10C7 code?
Repair costs can vary but may range from $200 to $1,000, depending on whether the issue is a minor wiring fix or requires replacing the reductant control module or ECM.
Discuss the causes and fixes for P10C7 2016 GMC Sierra OBDII Code
Code P10C7 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.