P10C7 2014 GMC Sierra Code - Reductant Control System Signal Message Counter Incorrect
Quick Answer
The P10C7 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Reductant Control System Signal Message Counter being incorrect. Common causes include Faulty Reductant Control Module, DEF tank sensor malfunction, Wiring or connection issues in the Reductant Control System. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10C7 2014 GMC Sierra indicates Reductant Control System Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty Reductant Control Module, DEF tank sensor malfunction, Wiring or connection issues in the Reductant Control System.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P10C7 2014 GMC Sierra Description
The P10C7 diagnostic trouble code (DTC) for a 2014 GMC Sierra indicates a problem with the Reductant Control System Signal Message Counter being incorrect. The Reductant Control System is a crucial component of the vehicle's emissions control system, responsible for reducing harmful emissions by injecting a urea-based solution (DEF - Diesel Exhaust Fluid) into the exhaust stream. This process helps convert nitrogen oxides (NOx) into harmless nitrogen and water vapor.
Common Causes of P10C7 2014 GMC Sierra
- Faulty Reductant Control Module
- DEF tank sensor malfunction
- Wiring or connection issues in the Reductant Control System
- Software or programming errors
- Contaminated or incorrect DEF fluid
Symptoms of P10C7 2014 GMC Sierra
- Check Engine Light illuminated
- Reduced fuel efficiency
- Increased exhaust emissions
- Engine misfires or hesitation
- Reduced engine power
How to Fix P10C7 2014 GMC Sierra
- Diagnose the Reductant Control System using a scan tool to retrieve the specific error codes and data related to the P10C7 code.
- Inspect the Reductant Control Module, DEF tank sensor, wiring, and connections for any visible damage or corrosion.
- Test the functionality of the Reductant Control System components, including the DEF injector, pump, and lines.
- Clear the error codes and reset the system, then monitor the vehicle's performance to ensure the issue has been resolved.
- If necessary, replace faulty components or repair wiring/connectivity issues to correct the Reductant Control System Signal Message Counter error.
Cost to Fix P10C7 2014 GMC Sierra
The typical repair costs for addressing a P10C7 code on a 2014 GMC Sierra can vary depending on the specific cause of the issue. On average, the parts required for this repair, such as a Reductant Control Module or DEF tank sensor, can range from $200 to $500. Labor costs at auto repair shops typically range from $80 to $150 per hour, with the total repair bill potentially amounting to $300 to $800 or more. It is advisable to consult with a professional mechanic to get an accurate estimate based on the specific diagnosis and repair needed for your vehicle.
Need more information about the P10C7 2014 GMC Sierra code?
Need more information on how to fix the P10C7 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10C7 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10C7 2014 GMC Sierra Code
What does the OBDII code P10C7 mean on a 2014 GMC Sierra?
P10C7 indicates an issue with the Reductant Control System, specifically that the signal message counter from the reductant control module is incorrect or out of sync.
What are the symptoms of code P10C7 on a 2014 GMC Sierra?
Common symptoms include the Check Engine Light turning on, potential DEF system warnings, and possible restrictions in engine performance if the issue persists.
What causes the P10C7 code to appear?
The code can be caused by a faulty reductant control module, wiring issues, communication errors between modules, or software glitches in the vehicle’s control systems.
Can I still drive my 2014 GMC Sierra with the P10C7 code?
While the truck may remain drivable initially, ignoring the issue could lead to reduced engine power or a DEF system malfunction, potentially causing the vehicle to enter limp mode.
How can I diagnose the P10C7 code?
Diagnosis involves scanning for codes with an OBDII scanner, inspecting the reductant control module and related wiring for damage, and testing communication between the module and the ECM.
How is the P10C7 code fixed?
Repairs may include reprogramming or updating the reductant control module, repairing or replacing faulty wiring, or replacing the module if it is defective.
Can a software update resolve the P10C7 code?
Yes, in some cases, a software update for the reductant control system or ECM may resolve communication errors causing the code.
What tools are needed to fix the P10C7 code?
Tools include an OBDII scanner, multimeter for electrical testing, and possibly a dealer-level diagnostic tool for reprogramming or module updates.
Is the P10C7 code covered under warranty for a 2014 GMC Sierra?
This depends on the vehicle’s mileage and specific warranty terms, especially if it relates to emissions system components like the DEF system.
How much does it cost to repair the P10C7 code on a 2014 GMC Sierra?
Costs vary depending on the root cause but may range from $150 for a software update to $1,000 or more for module replacement, including labor.
Discuss the causes and fixes for P10C7 2014 GMC Sierra OBDII Code
Code P10C7 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.