Engine-Codes.com
Engine-Codes – Chevrolet – P10B9 2016 Chevrolet Silverado

P10B9 2016 Chevrolet Silverado Code - Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 1

Quick Answer

The P10B9 diagnostic trouble code (DTC) indicates an issue with the communication between the Mass Air Flow (MAF) sensor and the Barometric Pressure (BARO) sensor in Bank 1 of a 2016 Chevrolet Silverado. Common causes include Faulty Mass Air Flow (MAF) sensor or Barometric Pressure (BARO) sensor, Damaged or corroded wiring or connectors leading to the sensors, Software issues or glitches within the Engine Control Module (ECM). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P10B9 2016 Chevrolet Silverado indicates Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 1.
Common causes
Common causes include Faulty Mass Air Flow (MAF) sensor or Barometric Pressure (BARO) sensor, Damaged or corroded wiring or connectors leading to the sensors, Software issues or glitches within the Engine Control Module (ECM).
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Oct 23, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P10B9 2016 Chevrolet Silverado Description

The P10B9 diagnostic trouble code (DTC) indicates an issue with the communication between the Mass Air Flow (MAF) sensor and the Barometric Pressure (BARO) sensor in Bank 1 of a 2016 Chevrolet Silverado. This code signifies that the Engine Control Module (ECM) has detected an inconsistency in the signal messages being sent from these sensors, which are critical for the proper functioning of the vehicle's air-fuel mixture calculations.

OBDII Code P10B9 2016 Chevrolet Silverado - Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 1
P10B9 2016 Chevrolet Silverado Code - Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 1

Common Causes of P10B9 2016 Chevrolet Silverado

  1. Faulty Mass Air Flow (MAF) sensor or Barometric Pressure (BARO) sensor.
  2. Damaged or corroded wiring or connectors leading to the sensors.
  3. Software issues or glitches within the Engine Control Module (ECM).
  4. Vacuum leaks in the intake system affecting air pressure readings.
  5. Contaminated or dirty MAF sensor, affecting its ability to measure airflow accurately.

Symptoms of P10B9 2016 Chevrolet Silverado

  1. Rough idling or stalling when the engine is running.
  2. Decreased fuel efficiency, leading to more frequent refueling.
  3. Engine misfires or hesitation during acceleration.
  4. Check Engine Light illuminated on the dashboard.
  5. Poor engine performance, especially under load or during acceleration.

How to Fix P10B9 2016 Chevrolet Silverado

  1. Diagnostic Testing: Begin with a thorough diagnostic scan to confirm the P10B9 code and check for any additional codes that may provide further insight into the issue.
  2. Visual Inspection: Inspect the wiring and connectors associated with the MAF and BARO sensors for any signs of damage, corrosion, or loose connections.
  3. Sensor Testing: Test the MAF and BARO sensors using a multimeter or scan tool to ensure they are functioning correctly and providing accurate readings.
  4. Cleaning or Replacing Sensors: If the MAF sensor is dirty, clean it with a specialized MAF cleaner. If it is faulty, or if the BARO sensor is defective, replace the affected sensor(s).
  5. ECM Reprogramming: If the issue persists after replacing sensors, consider reprogramming or updating the ECM software to resolve any potential glitches.

Cost to Fix P10B9 2016 Chevrolet Silverado

The typical repair costs for addressing the P10B9 code can range from $150 to $600, depending on the specific repairs needed. This estimate includes parts and labor for sensor replacement or repair. The cost of a new MAF or BARO sensor can range from $50 to $200 each, while labor costs can vary significantly. Most auto repair shops charge between $80 and $150 per hour; however, rates can be higher in metropolitan areas or at dealerships, while independent shops may offer lower rates. It's advisable to check local rates for a more precise estimate, as the total cost can also be influenced by the specific diagnosis time required for your vehicle's make and model.

Need more information about the P10B9 2016 Chevrolet Silverado code?

Need more information on how to fix the P10B9 2016 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P10B9 2016 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P10B9 2016 Chevrolet Silverado Code

1. What does the OBDII code P10B9 mean for a 2016 Chevrolet Silverado?

P10B9 indicates an issue with the Mass Air Flow (MAF) Sensor and Barometric Pressure Sensor, specifically that the signal message counter for Bank 1 is incorrect.

2. What are the symptoms of the P10B9 code on a 2016 Chevrolet Silverado?

Symptoms may include reduced engine performance, poor fuel economy, rough idling, difficulty starting, and the check engine light being illuminated.

3. What causes the P10B9 code on a 2016 Chevrolet Silverado?

Common causes include a malfunctioning MAF sensor, a faulty barometric pressure sensor, wiring or connector issues, or a problem with the Engine Control Module (ECM).

4. Can a dirty air filter cause the P10B9 code to appear?

A dirty or clogged air filter is unlikely to directly cause this code but can contribute to MAF sensor issues over time, potentially triggering related errors.

5. How do I diagnose the P10B9 code on my 2016 Chevrolet Silverado?

Diagnosis involves checking the MAF sensor and barometric pressure sensor for proper operation, inspecting wiring and connectors for damage, and using a scan tool to monitor sensor readings.

6. Can I drive my 2016 Chevrolet Silverado with the P10B9 code?

While the vehicle may still be drivable, it’s not recommended as it could lead to reduced performance, poor fuel efficiency, and potential long-term damage.

7. How do I fix the P10B9 code on a 2016 Chevrolet Silverado?

Repairs may include cleaning or replacing the MAF sensor, replacing the barometric pressure sensor, repairing damaged wiring or connectors, or reprogramming the ECM if necessary.

8. How much does it cost to fix a P10B9 code on a 2016 Chevrolet Silverado?

The cost varies depending on the repair, but replacing a MAF sensor typically ranges from $150 to $350, while addressing wiring issues or ECM reprogramming may cost more.

9. Can a software update fix the P10B9 code on a 2016 Chevrolet Silverado?

In some cases, an ECM software update can resolve communication or signal issues between sensors, but this should be confirmed with a professional diagnostic.

10. How can I prevent the P10B9 code from recurring on my 2016 Chevrolet Silverado?

Regular maintenance, including keeping the air filter clean, inspecting sensors and wiring, and addressing check engine light issues promptly, can help prevent this code.

Discuss the causes and fixes for P10B9 2016 Chevrolet Silverado OBDII Code

Submit a New Comment

Code P10B9 2016 Chevrolet Silverado comments

No comments found for this page.