P10B8 2018 GMC Sierra Code - Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 2
Quick Answer
The diagnostic trouble code P10B8 for a 2018 GMC Sierra indicates an issue with the Mass Air Flow (MAF) Sensor Barometric Pressure Sensor Signal Message Counter being incorrect in Bank 2. Common causes include Faulty MAF Sensor: A malfunctioning Mass Air Flow sensor can send incorrect signals to the engine control unit, Barometric Pressure Sensor Failure: A failing Barometric Pressure sensor can also contribute to the incorrect message counter, Wiring Issues: Damaged or corroded wiring connections between the sensors and the engine control unit can disrupt communication. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10B8 2018 GMC Sierra indicates Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 2.
- Common causes
- Common causes include Faulty MAF Sensor: A malfunctioning Mass Air Flow sensor can send incorrect signals to the engine control unit, Barometric Pressure Sensor Failure: A failing Barometric Pressure sensor can also contribute to the incorrect message counter, Wiring Issues: Damaged or corroded wiring connections between the sensors and the engine control unit can disrupt communication.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P10B8 2018 GMC Sierra Description
The diagnostic trouble code P10B8 for a 2018 GMC Sierra indicates an issue with the Mass Air Flow (MAF) Sensor Barometric Pressure Sensor Signal Message Counter being incorrect in Bank 2. The Mass Air Flow sensor measures the amount of air entering the engine, which is crucial for the engine control unit to determine the correct air-fuel mixture for combustion. The Barometric Pressure Sensor provides information about the atmospheric pressure, which is used by the engine control unit to adjust fuel delivery and ignition timing.
Common Causes of P10B8 2018 GMC Sierra
- Faulty MAF Sensor: A malfunctioning Mass Air Flow sensor can send incorrect signals to the engine control unit.
- Barometric Pressure Sensor Failure: A failing Barometric Pressure sensor can also contribute to the incorrect message counter.
- Wiring Issues: Damaged or corroded wiring connections between the sensors and the engine control unit can disrupt communication.
- Vacuum Leaks: Any leaks in the intake system can affect the accuracy of sensor readings.
- Software Glitch: Occasionally, a software issue within the engine control unit can cause communication errors between sensors.
Symptoms of P10B8 2018 GMC Sierra
- Check Engine Light: The most common symptom associated with this code is the illumination of the Check Engine Light on the dashboard.
- Reduced Engine Power: The vehicle may experience a loss of power or acceleration due to incorrect air-fuel mixture.
- Rough Idle: The engine may idle roughly or inconsistently, indicating a problem with the air intake system.
- Poor Fuel Economy: Incorrect readings from the sensors can lead to decreased fuel efficiency.
- Stalling: In severe cases, the engine may stall or have difficulty starting due to incorrect sensor signals.
How to Fix P10B8 2018 GMC Sierra
- Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and perform further testing to pinpoint the exact cause of the problem.
- Inspect Sensors: Check the MAF sensor and Barometric Pressure sensor for any signs of damage or malfunction.
- Check Wiring: Inspect the wiring harness for any breaks, corrosion, or loose connections that may be affecting sensor communication.
- Replace Sensors: If either sensor is found to be faulty, replace it with a new, OEM-quality sensor.
- Clear Codes and Test: After replacing the sensors, clear the trouble codes from the engine control unit and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P10B8 2018 GMC Sierra
The cost of repairing a Mass Air Flow Sensor Barometric Pressure Sensor Signal Message Counter Incorrect Bank 2 issue can vary depending on the specific cause of the problem and the cost of parts and labor. On average, the cost of replacing a MAF sensor or Barometric Pressure sensor can range from $100 to $300 each, not including labor costs. Labor rates at auto repair shops typically range from $80 to $150 per hour. Additional costs may include diagnostic fees and any other necessary repairs. It is advisable to consult with a professional mechanic for an accurate estimate based on the specific circumstances of the vehicle.
Need more information about the P10B8 2018 GMC Sierra code?
Need more information on how to fix the P10B8 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10B8 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10B8 2018 GMC Sierra Code
What does the OBDII code P10B8 mean on a 2018 GMC Sierra?
P10B8 indicates an issue with the Mass Air Flow (MAF) Sensor or Barometric Pressure Sensor on Bank 2, where the signal message counter is incorrect.
What are the common symptoms of code P10B8 in a 2018 GMC Sierra?
Symptoms may include reduced engine performance, poor fuel efficiency, rough idling, and the illumination of the check engine light.
What causes the P10B8 code to appear in a 2018 GMC Sierra?
Common causes include a faulty MAF sensor, a defective barometric pressure sensor, wiring issues, or a problem with the ECM (Engine Control Module).
Can a dirty air filter cause the P10B8 code to trigger?
While a dirty air filter can indirectly affect MAF sensor readings, it is not a direct cause of the P10B8 code. However, replacing it may help improve overall performance.
How can I diagnose the P10B8 code on my 2018 GMC Sierra?
Start by checking the wiring and connectors for the MAF and barometric pressure sensors. Use a scan tool to monitor sensor data and compare it to manufacturer specifications.
Is it safe to drive with the P10B8 code in my 2018 GMC Sierra?
Driving with this code is generally not recommended, as it can lead to engine performance issues and potentially cause further damage if not addressed.
How do I fix the P10B8 code on a 2018 GMC Sierra?
Repairs may include replacing the faulty MAF or barometric pressure sensor, repairing damaged wiring, or reprogramming the ECM if necessary.
Can a software update resolve the P10B8 code on a 2018 GMC Sierra?
In some cases, a software update for the ECM may resolve the issue if the problem is related to incorrect communication between sensors.
What tools do I need to troubleshoot the P10B8 code?
You’ll need an OBDII scan tool capable of reading live data, a multimeter for checking wiring and connections, and possibly a repair manual for sensor specifications.
How much does it cost to fix the P10B8 code on a 2018 GMC Sierra?
The repair cost depends on the root cause. Replacing a MAF sensor could cost $150–$300, while fixing wiring or reprogramming the ECM may vary. Always get a professional diagnosis for accurate pricing.
Discuss the causes and fixes for P10B8 2018 GMC Sierra OBDII Code
Code P10B8 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.