P10B7 2018 GMC Sierra Code - Mass Air Flow Sensor Intake Air Signals Message Counter Incorrect Bank 2
Quick Answer
The diagnostic trouble code P10B7 for a 2018 GMC Sierra indicates a problem with the Mass Air Flow (MAF) Sensor Intake Air Signals Message Counter being incorrect for Bank 2. Common causes include Faulty Mass Air Flow (MAF) sensor, Wiring or connector issues, Dirty or contaminated MAF sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P10B7 2018 GMC Sierra indicates Mass Air Flow Sensor Intake Air Signals Message Counter Incorrect Bank 2.
- Common causes
- Common causes include Faulty Mass Air Flow (MAF) sensor, Wiring or connector issues, Dirty or contaminated MAF sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P10B7 2018 GMC Sierra Description
The diagnostic trouble code P10B7 for a 2018 GMC Sierra indicates a problem with the Mass Air Flow (MAF) Sensor Intake Air Signals Message Counter being incorrect for Bank 2. The Mass Air Flow sensor is a critical component of the vehicle's engine management system, as it measures the amount of air entering the engine to determine the correct air-fuel mixture for combustion. In this case, the message counter being incorrect on Bank 2 suggests that there is a discrepancy in the signals being sent by the MAF sensor for the second bank of cylinders in the engine.
Common Causes of P10B7 2018 GMC Sierra
- Faulty Mass Air Flow (MAF) sensor
- Wiring or connector issues
- Dirty or contaminated MAF sensor
- Intake air system leak
- Engine vacuum leak
Symptoms of P10B7 2018 GMC Sierra
- Check engine light illuminated
- Reduced fuel efficiency
- Rough idling or stalling
- Hesitation or lack of power during acceleration
- Failed emissions test
How to Fix P10B7 2018 GMC Sierra
- Begin by diagnosing the specific cause of the incorrect message counter on Bank 2 by using a scan tool to monitor the MAF sensor data.
- Inspect the MAF sensor and its wiring for any visible damage or contamination. Clean the sensor if necessary.
- Check for any leaks in the intake air system and repair as needed.
- If the MAF sensor is determined to be faulty, replace it with a new OEM or high-quality aftermarket sensor.
- Clear the diagnostic trouble codes and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P10B7 2018 GMC Sierra
The cost of repairing a Mass Air Flow sensor issue can vary depending on the specific cause of the problem and the cost of parts and labor. On average, replacing a MAF sensor can cost between $100 to $400, including parts and labor. However, additional diagnostic time and labor charges may apply, so it is advisable to consult with a trusted mechanic or auto repair shop for a more accurate estimate based on the specific circumstances of the vehicle. Keep in mind that labor rates can vary between different locations and types of repair facilities.
Need more information about the P10B7 2018 GMC Sierra code?
Need more information on how to fix the P10B7 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P10B7 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P10B7 2018 GMC Sierra Code
1. What does the OBDII code P10B7 mean on a 2018 GMC Sierra?
P10B7 indicates an issue with the Mass Air Flow (MAF) sensor where the intake air signals message counter is incorrect for Bank 2.
2. What are the common symptoms of the P10B7 code?
Symptoms may include reduced engine performance, poor fuel efficiency, rough idling, and the check engine light being illuminated.
3. What causes the P10B7 code on a 2018 GMC Sierra?
Common causes include a faulty MAF sensor, wiring or connection issues, intake air leaks, or software glitches in the powertrain control module (PCM).
4. Can a dirty air filter cause the P10B7 code?
Yes, a clogged or dirty air filter can restrict airflow and potentially contribute to this code, as it may affect the MAF sensor readings.
5. How do I fix the P10B7 code on my GMC Sierra?
Start by inspecting and cleaning the MAF sensor, checking for damaged wiring or connectors, and replacing the air filter if needed. If the issue persists, the MAF sensor or PCM may need to be replaced.
6. Is it safe to drive with the P10B7 code?
While it may be possible to drive, it is not recommended as it can lead to further engine issues, reduced performance, and increased fuel consumption.
7. How do I test the MAF sensor for the P10B7 code?
You can use a multimeter to check the MAF sensor's voltage and resistance. Compare the values to the manufacturer's specifications to determine if the sensor is faulty.
8. Can a vacuum leak trigger the P10B7 code?
Yes, a vacuum leak can affect airflow readings and potentially cause the P10B7 code to appear.
9. Does the P10B7 code affect only Bank 2?
Yes, this code specifically refers to Bank 2, which is the side of the engine opposite Bank 1 (usually where cylinder 2 is located).
10. Will clearing the P10B7 code fix the problem?
Clearing the code may turn off the check engine light temporarily, but the underlying issue must be addressed to prevent the code from returning.
Discuss the causes and fixes for P10B7 2018 GMC Sierra OBDII Code
Code P10B7 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.