P1065 Nissan Code - ECM Power Supply Circuit
Quick Answer
The P1065 Nissan code refers to a problem with the ECM (Engine Control Module) power supply circuit. Common causes include Faulty ECM power relay, Wiring issues in the power supply circuit, Loose or corroded electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1065 Nissan indicates ECM Power Supply Circuit.
- Common causes
- Common causes include Faulty ECM power relay, Wiring issues in the power supply circuit, Loose or corroded electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1065 Nissan Description
The P1065 Nissan code refers to a problem with the ECM (Engine Control Module) power supply circuit. The ECM is a crucial component of the vehicle's engine management system, responsible for controlling various functions such as fuel injection, ignition timing, and emissions control. The power supply circuit provides the necessary voltage and current to the ECM for it to function properly.
Common Causes of P1065 Nissan
- Faulty ECM power relay
- Wiring issues in the power supply circuit
- Loose or corroded electrical connections
- Battery voltage irregularities
- ECM failure
Symptoms of P1065 Nissan
- Rough idling
- Stalling
- Poor acceleration
- Engine misfires
- Illuminated check engine light
How to Fix P1065 Nissan
- Begin by conducting a thorough inspection of the power supply circuit, checking for any loose or damaged wiring, connectors, or components.
- Test the ECM power relay to ensure it is functioning correctly. Replace if necessary.
- Check the battery voltage and charging system to ensure they are within the proper range.
- Clear the code from the ECM memory using a diagnostic scanner.
- Test drive the vehicle to verify that the issue has been resolved and that the code does not return.
Cost to Fix P1065 Nissan
The typical repair costs for addressing a P1065 Nissan code can vary depending on the specific cause of the issue. In general, you can expect to pay anywhere from $100 to $500 for parts and labor. Keep in mind that the exact cost will depend on the extent of the repairs needed and the rates charged by the auto repair shop. It is recommended to obtain quotes from multiple shops to ensure you are getting a fair price for the repair.
Need more information about the P1065 Nissan code?
Need more information on how to fix the P1065 Nissan code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1065 Nissan code diagnosed by a professional: Find a repair shop in your area
Information for Specific Nissan Models
- P1065 2005 Nissan Altima Sedan — ECM Power Supply Circuit
- P1065 2004 Nissan Maxima — ECM Power Supply Circuit
- P1065 2005 Nissan Maxima — ECM Power Supply Circuit
- P1065 2003 Nissan Sentra — ECM Power Supply Circuit
Frequently Asked Questions about P1065 Nissan Code
1. What are the common symptoms of OBDII code P1065 in a Nissan vehicle?
- Common symptoms include engine misfires, stalling, rough idling, and a noticeable decrease in engine performance.
2. What are the possible causes of OBDII code P1065 ECM Power Supply Circuit in a Nissan?
- The code can be triggered by issues with the ECM power supply circuit, such as a faulty ECM relay, damaged wiring, or a failing ECM.
3. How can I diagnose the OBDII code P1065 in my Nissan vehicle?
- Diagnosing the code typically involves using a scan tool to read the fault codes, testing the ECM power supply circuit, checking the ECM relay, and inspecting the wiring for any damage.
4. Can a weak car battery cause OBDII code P1065 to appear in a Nissan?
- Yes, a weak or failing car battery can sometimes lead to insufficient power supply to the ECM, triggering the P1065 code.
5. Are there any DIY repair tips for fixing OBDII code P1065 in a Nissan?
- DIY repair tips include checking and replacing the ECM relay, inspecting and repairing any damaged wiring, and ensuring a strong electrical connection to the ECM.
6. Is it safe to drive my Nissan with OBDII code P1065 active?
- It is not recommended to drive your vehicle with the P1065 code active, as it can lead to engine performance issues and potential stalling, which may compromise safety.
7. How much does it typically cost to repair OBDII code P1065 in a Nissan?
- The cost of repairing the P1065 code can vary depending on the underlying issue, but it may range from $100 to $500, including parts and labor.
8. Can resetting the ECM clear the OBDII code P1065 in a Nissan?
- Resetting the ECM may temporarily clear the code, but if the underlying issue is not addressed, the code is likely to reappear after some driving cycles.
9. Will OBDII code P1065 cause my Nissan to fail an emissions test?
- Yes, having the P1065 code active can cause your Nissan to fail an emissions test due to the impact it has on engine performance and emissions control.
10. How can I prevent OBDII code P1065 from reoccurring in my Nissan?
- Regularly maintaining your vehicle, ensuring a strong electrical system, and promptly addressing any issues related to the ECM power supply circuit can help prevent the code from reoccurring.
Discuss the causes and fixes for P1065 Nissan OBDII Code
-
05 maxima 3.5 started running rough and white smoke that smelled of fuel coming from exhaust, replaced injector that was just pouring gas into cylinder, restarted, smoke stopped after a few minutes but car still wouldn't idle well and got service engine soon light code P1065 why?
-
There must be something else causing the problem (e.g. Air Flow Meter), when there is a problem with the ECM and the P1065 code is set, there are no engine performance problem.
-
My 04 Maxima 6spd lost all throttle couple of months ago and I've done pretty much everything in my knowledge but it seems like this will have to be sent to someone with knowledge. Won't rev pass 1400rpm and I have about 6 codes. P1126, P1122 "throttle body relay", P0300 "random/multiple misfire" and new added P1065. Any help will be appreciated.
-
Have you checked all the fuses? if all the fuses are OK then the most likely problem is the throttle body. Problems with the ECM (P1065) or a cylinder misfire code (P0300) wont cause the lost of throttle response.
-
I've replaced the entire IPDM, swapped the throttle body with the OEM one "I'm using an 09 MAXIMA tb" still limp mode.
-
I doubt using a TB from a 09 Maxima is a good test. If all the fuses are OK, then my best guess is that the problem is the TB, and after the TB has been replaced, the idle learn value needs to be reset.
-
The car worked for a while, raced and drove around like normal and suddenly the car just lost throttle. I took the throttle body and installed it in a friends car and it worked np. I wish it was the TB because it's the easiest thing to swap. I hope it's not the ECU or the ipdm because they're both expensive to replace.
-
Engine starts up and cuts off, but if you hold accelerator for start up then release it the engine will stay running with no problem.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.